I was hired to wire in an 95 LT1 that was swapped into a 95 GMC truck. Its all together and on the road. I have a few bugs in the swap that I'm trying to help owner stamp out. I'm new to tuning, and I'm using TunerPro. The ECU isn't commanding the fans to turn on. I found out the values were set at 160* on fan1 and 180* for fan 2. BUT,,,, its suppose to be in Celsius. That was easy. I would like to correct the speedo. I found a link to a spread sheet to calculate it, and tell me what to change in TunerPro. BUT I cant open the spread sheet. I cant get either program to down load the be able to use it. Any other options? Can someone take my info and put it in the calculator and possible post it here?
Thanks