I've made a few LS wiring harnesses, attached is a "Universal" Drive by Cable Layout.
Enjoy,
dave w
I've made a few LS wiring harnesses, attached is a "Universal" Drive by Cable Layout.
Enjoy,
dave w
Sweet! This is for the MAF with an integrated IAT sensor I take it?
Yes, 5 wire MAF.Originally Posted by TerryD
dave w
Last edited by dave w; 06-03-2014 at 04:33 PM.
Nice looking harness. Your making those right?
79 Jeep Cherokee, AMC 401, T-18 manual trans, hydroboost, 16197427 MPFI system---the toy
93 Jeep YJ Wrangler, 4.0L, 5 speed, 8.8 rear, homebrew hub conversion and big brakes, hydroboost, 2.5in OME lift, 31x10.50's---the daily driver
99 Jeep WJ Grand Cherokee limited, 4.0L, auto, 2wd, leather and power everything, 99% stock---the long distance highway ride.
Yes, I'm making custom / universal LSx harnesses.
dave w
Good job! Looks every bit as good, if not better than something you would get from somewhere like painless. And I bet its a lot more reasonably priced too.
79 Jeep Cherokee, AMC 401, T-18 manual trans, hydroboost, 16197427 MPFI system---the toy
93 Jeep YJ Wrangler, 4.0L, 5 speed, 8.8 rear, homebrew hub conversion and big brakes, hydroboost, 2.5in OME lift, 31x10.50's---the daily driver
99 Jeep WJ Grand Cherokee limited, 4.0L, auto, 2wd, leather and power everything, 99% stock---the long distance highway ride.
That is a NICE looking harness. What brand of fuse box are you using? I like it and haven't seen one like it before.
Jeff
98 GMC RCSB, 5.0, 4L80e, Moser M60, 4.10 gear, Homemade twin turbo w/Junkyard T3 turbos, 24x CNP, 12200411 PCM.
The pricing is on par with Painless. I'm unable to bulk purchase wiring and the associated parts. I have limited production capability, because I have full time job. For a project owner that wants a clean factory looking harness, is where my harness business is focused. I provide custom lengths and additional circuits, like the cooling fans, not usually offered by "Brand Name" harness suppliers.
I posted the layout to help DIY project owners that plan to re-purpose a used harness for their project. Solder splicing some wires can transform a used harness into a good looking harness also.
Mouser has them, http://www.mouser.com/Search/Product...76-PDM21001LXM I'm thinking an internet search will find better pricing?
Most of the wiring will use seal http://www.mouser.com/Search/Product...ey829-15324982
Most of the wiring will use terminal http://www.mouser.com/Search/Product...ey829-12077413
Some assembly required.
dave w
Last edited by dave w; 06-04-2014 at 04:25 PM.
Thanks Dave,
Jeff
98 GMC RCSB, 5.0, 4L80e, Moser M60, 4.10 gear, Homemade twin turbo w/Junkyard T3 turbos, 24x CNP, 12200411 PCM.
Ready to Plug - n - Play.
dave w
Posting Permissions
Reply With Quote
Bookmarks