Greeting all,
Working on my timing tables, 92 Corvette LT1 using $DA2. I have made a few data logs. I have noticed spark retard in about the same RPM and load in each log. I have reviewed the logs in the monitor and with trace on.
I guess my questions are. Is it best to adjust the table only in the cells the spark is being retarded in during the event (from 1-4 connecting cells) or just the cell the retard started in?
Also would you start out removing 1 degree at a time until the retard goes away?
I also noticed the timing tables in 3D look rough. Should I use the smoothing tool on them like the VE tables?
Thanks for your help!
Bookmarks