First post

[trmccarty]

Hello all,

I have been reading this forum for some time now. Looking over the TunerPro tutorials, and following along with my laptop. I have purchased the Moates AutoProm package and run a few data logs with TunerPro.
I own a 92 Corvette LT1 with 6 speed. I have installed long tube headers, mild cam, 1.6 rocker arms and 4.10 gears.
I have made some simple changes, idle, fan temps, rev limits, etc. I am ready to move on to the fuel mixture. The data logs show I am running a little rich, mostly at idle and midrange.
I have been studying how to adjust the VE tables and was reading the tutorial and it showed using a VE adjustment table, or Excel spreadsheet to help make changes to the tables. I could not find a spreadsheet for the $DA2 file I am using. Is there one available? Am I not looking in the right place?

Thanks, for all who take the time to post to this forum, so persons like me can learn new tricks.

[dave w]

I'll look around for the LT1 spreadsheet that I put together. I'll post back later.

dave w

[dave w]

I'll look around for the LT1 spreadsheet that I put together. I'll post back later.

dave w

I've made a new spreadsheet for $DA2 and posted it here: http://www.gearhead-efi.com/Fuel-Inj...9610#post39610

dave w

[trmccarty]

Thanks! I guess I need to get busy, and see what I can do.

Thanks again Dave W.