need some help 4.3 cpi

[thumper3]

WHERE DID U GET YOUR .ADX FILE ?

The motor, harness and ecu came out of a 92 s10 blazer.

[thumper3]

WHERE DID U GET YOUR .ADX FILE ?

i pulled the motor, harness, ecu, tank and pump out of a 92 s10 blazer. never done a fuel injected swap before so I have no clue about the .ADX file. trying to see if i can use what i have to make it run

[thumper3]

can i just hook everything up and have it running the way it is without doing anything to the computer or no?

[Fast355]

can i just hook everything up and have it running the way it is without doing anything to the computer or no?

I think it would run pretty good as is. Never have played with the 1992 ECM for these however. I have more experience with the later 93+ stuff.

[thumper3]

I think it would run pretty good as is. Never have played with the 1992 ECM for these however. I have more experience with the later 93+ stuff.

so do I just need the ignition wire from my body harness hooked up to the ECM or is there other wires thanks.