Results 1 to 15 of 22

Thread: second opinion before i turn the key

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #13
    Electronic Ignition! Hillbilly's Avatar
    Join Date
    Apr 2014
    Age
    38
    Posts
    15
    Well, been a long while since I've been here. Had life get in the way haha. Two fuel pumps, a new gas tank, some sensors, distributor, and a baby, I got around to updating. I put the 80lbs injectors in my truck, tuned it a little, and thought I would see what everyone thinks. I drove around with 9 full size rail road ties in the bed (about 2250lbs being conservative). It runs GREAT but I'm far from done tuning it. Over the summer I'll be putting on some vortec heads, too. Just to recap what I'm running: 92 k2500, 7060 ecm, 357sb, flat top pistons, ported tbi heads with 2.02/1.60 valves, estimating 9.5:1 compression, summit sum1102 cam, 1.5 roller rockers, hedman competition headers, torker2 intake, 454tb with 80lbs injectors, injector pod spacer, AFPR cranked all the way up, msd 6al2. I had a salad bowl on but took it off because i didnt like how close it sat to the hood, need to get a cowl at some point haha. so i still have the choke tube and stock air cleaner assembly, except i have a k&n extreme flow filter lid and a 14 in filter sitting in the air cleaner. plugs are gaped out to .060 according to msd's recomendation, and running autolite plugs one step colder than stock. trans is a 4l80e, 4.10 gears and govloc in the rear. straight pipe exhaust, no mufflers or cats. no egr. thinking about getting a shift kit to put in it over the summer, too. I use the truck to haul a mud truck, and run in modified stock class in mud bogs just for fun. any suggestions for improvement, either mechanical or programming? i will say, the blm numbers seem pretty low (in the 105-124 range going up with map) in the lower rpms, but after about 2400 rpm they smooth out to 128 in every rpm and map.
    RPM/MAP 20 25 30 35 40 45 50 60 70 80 90 100
    0
    400 107 107 116 124.3 124.3 128 128
    800 105 107.7 107 115.7 124.3 119.6 128 128
    1200 108.3 105.3 105 105 105 105 117 124 125 125
    1600 112.2 107 107.9 105.1 106 105 108.9 121.1 117.7 124.5 125
    2000 116 113.8 114 110 108.9 113.4 110.3 119.1 120.8 125.3 123
    2400 128 128 128 128 128 105 125.9 125 125 126 126
    2800 128 128 128 128 128 128
    3200 128 128 128
    3600 128 128
    4000 128 128
    4400 128 128
    4800
    that was my last run to get my bin where it is now.
    Attached Files Attached Files

Similar Threads

  1. Trying to turn off vats
    By MYLTWON in forum TunerCat OBDII
    Replies: 13
    Last Post: 07-03-2013, 02:02 AM
  2. Check out this bin,opinion
    By Playtoy_18 in forum OBDII Tuning
    Replies: 24
    Last Post: 03-16-2013, 12:43 AM
  3. Replies: 8
    Last Post: 05-14-2012, 10:54 PM
  4. What's Your Opinion
    By Hard Driver in forum GM EFI Systems
    Replies: 21
    Last Post: 04-23-2012, 04:29 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •