Fiero 7730 ecm swap with distributor

[boostedfiero]

I have a 1987 fiero that I have done a 7730 ecm swap in it. I need help finding a bin file that will run it, the engine is a 2.8 stroked to 3.4 and transmission is a original auto.

[RobertISaar]

you'll need to change AT MOST 3 settings because of a distributor in place of DIS.

which mask are you running/planning on?

[boostedfiero]

I plane on running the $88 mask.

[RobertISaar]

if you start with one of the F-body BINs, you'll already have one setup for a distributor on the iron-head engine, which is actually a decent starting place.

[boostedfiero]

I have been trying that $88 bin and I don't know what all to change just to get it to run .

[RobertISaar]

an F-body BIN should start and run without issue on a dizzy 2.8..... it won't be optimal, but it should do well enough.

unless VATS is interfering, in which case, disable these two flags:

VATS (X=Yes)
46 - VATS

you can probably get away with just the first one, but i would do both.