Page 1 of 2 12 LastLast
Results 1 to 15 of 16

Thread: New TP Version Launched - 5.00.8853.00 (11/26/15)

  1. #1
    Super Moderator
    Join Date
    Mar 2011
    Location
    Camden, MI
    Age
    35
    Posts
    3,026

    New TP Version Launched - 5.00.8853.00 (11/26/15)

    download page: http://tunerpro.net/downloadApp.htm
    direct(and updated when necessary) link: http://tunerpro.net/download/SetupTu..._v500_8944.exe
    non-RT direct link: http://tunerpro.net/download/SetupTu..._v500_8944.exe

    5.00.8942.00 (General Release) (12/14/16)
    •Added new functionality to Bin Stacker: ability to choose where null data goes, and to choose the null byte. This is useful for Ford stacking.
    •Added the abiliy to specify adjustment equations in table and function cells. For instance, if a cell has "1.2" in it, you can enter "=*2" to multiply it by 2 to get "2.4". or "=+ 3.2" to get "4.4" as a result, etc. This does not yet work in the scalar editor.
    •Added very basic mouse zooming to data acq monitors. Hold the Ctrl key and drag your mouse to zoom in on the time axis. Use the slider to reset the zoom. There are still several issues to work out.
    •Moved to Visual Studio 2015 compiler, toolset, and runtime redist. The redist bloats the download by 13MB.
    •Improved Quarterhorse initialization and bank support
    •Fixed issue with browsing for bins where you're prompted to create a file when browsing to a subdirectory
    •Fixed potential crashes when compare bins are different sizes from the editable bin
    Last edited by RobertISaar; 02-14-2017 at 03:19 AM.
    1995 Chevrolet Monte Carlo LS 3100 + 4T60E


  2. #2
    Super Moderator Six_Shooter's Avatar
    Join Date
    Feb 2011
    Posts
    2,968
    I was just thinking that very thing. Basically copy over the change log as well.
    The man who says something is impossible, is usually interrupted by the man doing it.

  3. #3
    Super Moderator
    Join Date
    Mar 2011
    Location
    Camden, MI
    Age
    35
    Posts
    3,026
    probably isn't a bad idea..... i'll do an edit in a minute.

    it could be some kind of placebo effect(or perhaps some kind of uncluttering occurred), but this release feels SUPER responsive.

    took a minute to reconfigure some of the stuff that got reset upon install, but otherwise.....
    1995 Chevrolet Monte Carlo LS 3100 + 4T60E


  4. #4
    Super Moderator Six_Shooter's Avatar
    Join Date
    Feb 2011
    Posts
    2,968
    I think it's placebo, Feels the same as it has for a long while now, to me.
    The man who says something is impossible, is usually interrupted by the man doing it.

  5. #5
    Fuel Injected! brian617's Avatar
    Join Date
    Apr 2013
    Location
    Arkansas
    Age
    45
    Posts
    711
    'Fixed issue where when comparing bins in a 3D chart, axes were
    not updated apporpriately when they are defined internally"


    This mean the 3d maps match the 2d's? That drives me nutts lol
    89 K1500 Scottsdale 5.7L 5spd 3:42 RamJet cam Dart iron TBI heads 427 PCM swap
    95 C2500 Cheyenne 6.5L turbo diesel 4L80e 4:10 DB2-4911 Manual pump conversion 0411 PCM trans control 2Bar COS
    05 Outback XT 2.5L turbo gas auto

  6. #6
    Super Moderator
    Join Date
    Mar 2011
    Location
    Camden, MI
    Age
    35
    Posts
    3,026
    5.00.8383.00 (General Release) (4/30/14)


    • Fixed issue where a particular piece of hardware wasn't
      properly detected
    • Fixed issue introduced in build 8369 where Moates Ostrich 2.0
      address watch (tracing) used incorrect addressing
    • Fixed issue with ELM327 plug-in where first byte of 2-byte PID
      was always 0
    • Updated ELM327 plug-in version number to 0.6
    1995 Chevrolet Monte Carlo LS 3100 + 4T60E


  7. #7
    Super Moderator
    Join Date
    Mar 2011
    Location
    Camden, MI
    Age
    35
    Posts
    3,026
    5.00.8414.00 (General Release) (8/25/14)


    • Fixed issue that prevented tables from being saved when a base
      offset is used that results in the table's unadjusted address being outside of
      the bin
    • Fixed issue where editing XDF table properties in the XDF
      editor while the table is open didn't result in the table reflecting the changes
    • Fixed issue where adding a new ADX item, then immediately
      dragging it to a new index in the tree without setting an ID, would result in an
      endless loop of errors


    Known issue to be fixed in next build:

    • issue that may cause table axis links not to be resolved
      on XDF load
    1995 Chevrolet Monte Carlo LS 3100 + 4T60E


  8. #8
    Super Moderator
    Join Date
    Mar 2011
    Location
    Camden, MI
    Age
    35
    Posts
    3,026
    5.00.8519.00 (General Release) (11/19/14)

    • XDF Item Finder toolbox is now resizeable
    • When a table graph is open and a new compare bin is loaded from the compare menu, the graph is now refreshed to show the new bin
    • When opening a new XDF with the XDF Item Finder toolbox open, the toolbox is now automatically closed
    • Fixed crash when attempting to connect to ALDL stream in AutoProm mode with no AutoProm attached to the PC
    • Fixed issue with keyboard shortcut assignment where attempting to assign the Escape key resulted in the shortcut window closing instead of assignment of the key itself
    • Fixed issue where choosing "Save As..." when saving an ADX didn't cause the editor title bar to update with the new filename and path
    • Fixed issue where recursion in a table or function equation wasn't properly being tracked and reported, resulting in over-reporting of recursion
    • Fixed a subtle but particularly heinous bug where XDF conversion equations that were recursive could result in variables with the same name being overwritten during recursive calculation (e.g. "CELL(ROW()+1; 0; FALSE) - X", where the value of X is set in the initial calculation frame, then overwritten when the CELL function is called with the value of X in that calculation frame))
    • Fixed issue with patches that would falsely report a buffer is patched when a portion of it is not actually patched
    • Fixed issue where table axis links may not always be resolved on XDF load. Current fix has very minor performance implication with large XDFs. Future improvement planned.
    1995 Chevrolet Monte Carlo LS 3100 + 4T60E


  9. #9
    Super Moderator Six_Shooter's Avatar
    Join Date
    Feb 2011
    Posts
    2,968
    5.00.8606.00 (General Release) (3/17/15)

    Exposed the ability to specify an ADX command to send when scanning is paused and unpaused. This required that the ADX Defaults be moved to the "More" tab in the ADX Header editor.
    Made vast improvements to the Moates Onboard Logger interface (for the Demon and Superlogger hardware), including multi-threading to keep the UI from locking up during long operations, auto-population of ADX for export, flash memory export to and import from file, and much more
    Added a very naive XDF parameter bulk editor. It will change endianness, sign, and will offset specified positive or negative amount all address equal to or greater than the offset
    Fixed issue where passing in a checksum element size less than 8 bits could result in an infinite loop during checksum calcutation
    Fixed issue where ADX List View separaters weren't being updated in real-time in the ADX editor while typing or changing separator text color
    Fixed issue where function graphs couldn't be interacted with
    Fixed issue where command timeouts weren't being passed to the port when running in shared emulator<->dataAcq mode
    The man who says something is impossible, is usually interrupted by the man doing it.

  10. #10
    Super Moderator
    Join Date
    Mar 2011
    Location
    Camden, MI
    Age
    35
    Posts
    3,026
    5.00.8713.00 (General Release) (7/11/15)


    • Simplified ADS importation. An ADS now loads immediately without being prompted to save, and the user is prompted to save before closing TunerPro or opening another definition, and added "save" and "save as" acquisition menu items
    • Added buttons to clear explicit data acquisition links in XDF tables and scalars
    • Added save and save as menu items to the Acquisition menu for datastream definitions
    • Compare bins can now be loaded when no primary bin is loaded
    • Difference tool will now allow you to compare bins when no primary bin is loaded
    • Fixed issue where 8-bit uploads to 16-bit emulators such as the Roadrunner failed
    • Fixed issue where ADX header pause and unpause commands aren't saved
    • Fixed hang when using the zoom feature in the ADX Monitor tab
    • Fixed possible delay when opening files from a removable path with no media in the drive. For common paths only (XDF, bin, ADX).
    • Fixed issue where colors could be repeated too frequently when adding ADX items to monitors through the context (right-click) menu
    • Fixed issue where explicit DA links in XDF Tables and Scalars were saved without hitting the apply button
    • Fixed issue where incrementing/decrementing items in the summary list didn't take the XDF global offset into account, and didn't properly align for 16-bit hardware (e.g. Roadrunner)
    1995 Chevrolet Monte Carlo LS 3100 + 4T60E


  11. #11
    Fuel Injected!
    Join Date
    Jun 2015
    Posts
    130
    I can't get it to work because of old laptop and xp. I tried to find 500.8200, but the links are dead.

  12. #12
    Super Moderator Six_Shooter's Avatar
    Join Date
    Feb 2011
    Posts
    2,968
    Quote Originally Posted by f85gtron View Post
    I can't get it to work because of old laptop and xp. I tried to find 500.8200, but the links are dead.
    I don't know if you've resolved this or not, but I just checked (2015-09-06) and the 500.8202 RT link worked for me, installed as well.
    The man who says something is impossible, is usually interrupted by the man doing it.

  13. #13
    Fuel Injected!
    Join Date
    Jun 2015
    Posts
    130
    Thanks. I gave in and bought a Windows tablet. It works perfectly. I guess it's about time I crawl out from the rock I'm under.

  14. #14
    Super Moderator
    Join Date
    Mar 2011
    Location
    Camden, MI
    Age
    35
    Posts
    3,026
    WAAAAAY behind this release. I guess that speaks volumes for how well TP currently does everything it does if you don't feel the need to constantly check for updates.

    5.00.8853.00 (General Release) (11/26/15)

    • Added the ability to double click on an item in the acquisition Item List panel to go straight to its editor page in the ADX Editor (useful!)
    • Added the ability to right click on a gauge in the acquisition dashboard panel to go straight to the dashboard's editor page in the ADX Editor (useful!)
    • Added validation to log file export to csv/tsv to ensure that outputted strings don't contain the delimiter (e.g. a bitmask state string has a comma in it when exporting to comma-separated value file), which will cause columns to shift in the output
    • Added change tracking to the ADX editor. Now, when changes are made, you'll be prompted to save when hitting the window close or cancel buttons in the ADX Editor
    • In the function editor, the save button icon changes when in emulation mode, matching the other editors.
    • When the bin compare tool is open and a new XDF is loaded, the compare tool is automatically closed, since the results are no longer valid
    • Fixed issues around emulation being enabled, then emulation hardware being released without first disabling emulation
    • Fixed issue where apply button wasn't enabled when editing the conversion equestion for XDF Scalars
    • Fixed issue where Endianness in XDF checksums wasn't being loaded from file correctly, resulting in the little endian checksums losing their little endianness when the XDF was loaded, leading to incorrect calculation
    • Fixed issue where ADX Bitmask true and false strings weren't escaped, which is required for XML strings
    • Fixed crash in item finder (Ctrl + F) when clicking in the whitespace after the returned item list
    • Fixed several issues with CSV->XDF importer, including broken row and column count field, and occasional skip of last field in a line
    • Fixed crash when browsing for an ADX item to display in a dashboard gauge, but selecting nothing and clicking "OK"
    1995 Chevrolet Monte Carlo LS 3100 + 4T60E


  15. #15
    Super Moderator
    Join Date
    Mar 2011
    Location
    Camden, MI
    Age
    35
    Posts
    3,026
    5.00.8942.00 (General Release) (12/14/16)


    •Added new functionality to Bin Stacker: ability to choose where null data goes, and to choose the null byte. This is useful for Ford stacking.
    •Added the abiliy to specify adjustment equations in table and function cells. For instance, if a cell has "1.2" in it, you can enter "=*2" to multiply it by 2 to get "2.4". or "=+ 3.2" to get "4.4" as a result, etc. This does not yet work in the scalar editor.
    •Added very basic mouse zooming to data acq monitors. Hold the Ctrl key and drag your mouse to zoom in on the time axis. Use the slider to reset the zoom. There are still several issues to work out.
    •Moved to Visual Studio 2015 compiler, toolset, and runtime redist. The redist bloats the download by 13MB.
    •Improved Quarterhorse initialization and bank support
    •Fixed issue with browsing for bins where you're prompted to create a file when browsing to a subdirectory
    •Fixed potential crashes when compare bins are different sizes from the editable bin
    1995 Chevrolet Monte Carlo LS 3100 + 4T60E


Similar Threads

  1. TunerPro Version 5 Tips thread
    By EagleMark in forum TunerPro Tuning Talk
    Replies: 29
    Last Post: 06-17-2021, 03:22 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •