New TP Version Launched - 5.00.8853.00 (11/26/15)

[RobertISaar]

download page: http://tunerpro.net/downloadApp.htm
direct(and updated when necessary) link: http://tunerpro.net/download/SetupTu..._v500_8944.exe
non-RT direct link: http://tunerpro.net/download/SetupTu..._v500_8944.exe

5.00.8942.00 (General Release) (12/14/16)
•Added new functionality to Bin Stacker: ability to choose where null data goes, and to choose the null byte. This is useful for Ford stacking.
•Added the abiliy to specify adjustment equations in table and function cells. For instance, if a cell has "1.2" in it, you can enter "=*2" to multiply it by 2 to get "2.4". or "=+ 3.2" to get "4.4" as a result, etc. This does not yet work in the scalar editor.
•Added very basic mouse zooming to data acq monitors. Hold the Ctrl key and drag your mouse to zoom in on the time axis. Use the slider to reset the zoom. There are still several issues to work out.
•Moved to Visual Studio 2015 compiler, toolset, and runtime redist. The redist bloats the download by 13MB.
•Improved Quarterhorse initialization and bank support
•Fixed issue with browsing for bins where you're prompted to create a file when browsing to a subdirectory
•Fixed potential crashes when compare bins are different sizes from the editable bin

[Six_Shooter]

I was just thinking that very thing. Basically copy over the change log as well.

[RobertISaar]

probably isn't a bad idea..... i'll do an edit in a minute.

it could be some kind of placebo effect(or perhaps some kind of uncluttering occurred), but this release feels SUPER responsive.

took a minute to reconfigure some of the stuff that got reset upon install, but otherwise.....

[Six_Shooter]

I think it's placebo, Feels the same as it has for a long while now, to me.

[brian617]

'Fixed issue where when comparing bins in a 3D chart, axes were
not updated apporpriately when they are defined internally"


This mean the 3d maps match the 2d's? That drives me nutts lol

[RobertISaar]

5.00.8383.00 (General Release) (4/30/14)

• Fixed issue where a particular piece of hardware wasn't
  properly detected
• Fixed issue introduced in build 8369 where Moates Ostrich 2.0
  address watch (tracing) used incorrect addressing
• Fixed issue with ELM327 plug-in where first byte of 2-byte PID
  was always 0
• Updated ELM327 plug-in version number to 0.6

[RobertISaar]

5.00.8414.00 (General Release) (8/25/14)

• Fixed issue that prevented tables from being saved when a base
  offset is used that results in the table's unadjusted address being outside of
  the bin
• Fixed issue where editing XDF table properties in the XDF
  editor while the table is open didn't result in the table reflecting the changes
• Fixed issue where adding a new ADX item, then immediately
  dragging it to a new index in the tree without setting an ID, would result in an
  endless loop of errors

Known issue to be fixed in next build:

• issue that may cause table axis links not to be resolved
  on XDF load