Bringing TBI and Multi Port Fuel Injection to a New Level.     EFI Conversions and Tuning! Seattle to Portland! E-mail Tuning Consultant!
Results 1 to 2 of 2

Thread: Suggestions for a starting bin

  1. #1
    Carb and Points!
    Join Date
    Apr 2014
    Location
    Caledonia WI
    Age
    46
    Posts
    3

    Suggestions for a starting bin

    Please help me choose a bin to start with for my new engine in my 88 IROC.

    L98 bored .030 to 355, nothing fancy just stock rotating assembly.
    Trickflow 195 aluminum heads 62cc 2.02/1.60
    Comp XR-264 HR-12 .488/.495 212/218 LSA 112
    Scorpion 1.6 roller rockers
    Edelbrock runners and base
    24 lb injectors
    Hooker shorties and 3" exhaust

    Iroc has 5 speed manual and 3.27:1 posi rear

    I was thinking APYP from an 89 vette with 6 speed, but the SA table looks like it might be too much advance. Any suggestions are much appreciated.

  2. #2
    Carb and Points!
    Join Date
    Apr 2014
    Location
    Caledonia WI
    Age
    46
    Posts
    3
    I forgot to add that the static compression is 9.5:1 and dynamic is 7.86:1

Similar Threads

  1. Choosing a good Truck Muffler. Suggestions?
    By chris in forum Gear Heads
    Replies: 20
    Last Post: 09-23-2013, 07:39 PM
  2. hi starting a tbi conversion on 78 vette
    By cobrareg in forum Introductions
    Replies: 10
    Last Post: 01-07-2013, 06:41 PM
  3. Long Starting with EBL Flash and TunerPro software
    By beast94 in forum GM EFI Systems
    Replies: 18
    Last Post: 06-02-2012, 05:28 PM
  4. hard starting/long crank time
    By kunsan1987 in forum GM EFI Systems
    Replies: 18
    Last Post: 05-21-2012, 12:06 PM
  5. Starting Fresh
    By Six_Shooter in forum Gear Heads
    Replies: 2
    Last Post: 03-03-2011, 04:19 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •