3800 duel bank 02's

[Playtoy_18]

Anybody know if it's as easy as using an Fbody file and checking the supercharged option for converting an L67 3800 supercharged motor?
None of the cars came with it that I know of except the F-body's.
Not sure if the pcm has the drivers for a bank 2 sensor or not,or if the Fbody .bin will support the 2bar map.
Hoping one of you that know the pcm's better can post up if you've tried it.
I'm almost finished with the L67 i'm swapping in my fiero,but need to coat headers and will have to have bungs welded in now before coating.

[ericjon262]

Anybody know if it's as easy as using an Fbody file and checking the supercharged option for converting an L67 3800 supercharged motor?
None of the cars came with it that I know of except the F-body's.
Not sure if the pcm has the drivers for a bank 2 sensor or not,or if the Fbody .bin will support the 2bar map.
Hoping one of you that know the pcm's better can post up if you've tried it.
I'm almost finished with the L67 i'm swapping in my fiero,but need to coat headers and will have to have bungs welded in now before coating.

ooh ooh I can help!

you don't need the F body file. what tuning software are you using?

[mecanicman]

I think tiny tuner has the abiltiy to change from single to dual if you have a bin to work with.

[Playtoy_18]

Usually Tunercat on V6's,though i also have TinyTuner.

[ericjon262]

in tunercat under switches, calibration options, check option dual bank fuel control. be sure to enable the codes for the other o2 sensor as well.

[Playtoy_18]

I wasn't sure if it would actually work or not,I knew that option was in there for some of them.
Of course the file i've been using for this engine doesn't have that option in the file.
But I can dig and use a different file no problem for this swap now.

[ericjon262]

I've got one if you need it.