Looking for 2012 5.3 liter E38 Connector Pin Out

[1project2many]

That still looks like a Benz connector.

Read this thread. About 5/8 down the first post is an image of a controller and connector:
http://mbworld.org/forums/cl-class-w...l500-w215.html



If that looks like the correct connector, this application list might give you potential donor cars:
http://www.carpartsdiscount.com/radi...tml?3593=54975

I'll let you look at these for a bit. If it seems like the right track I'll see if I can locate some part numbers for a new connector.

[dave w]

That still looks like a Benz connector.

If that looks like the correct connector, this application list might give you potential donor cars:

I'll let you look at these for a bit. If it seems like the right track I'll see if I can locate some part numbers for a new connector.

That looks EXACTLY like what I am looking for! I really appreciate the help!

dave w

[dave w]

Success! The 2012 wiring harness and E38 computer are working in the 2009 Wrangler. I was but one of the team members in the project. The nuts and bolts of the project were completed by Dean and his staff at Off-Road Components in Sandy Oregon. http://jscustomwebs.netfirms.com/Offroad/index.html

I would like to extend a HUGE Thank You to the members of gearhead-efi.com that supported me during this project. I had several questions, and the support here at gearhead-efi.com was AWESOME! I feel this project has been a success for all of us.

dave w

[JeepsAndGuns]

So did you end up finding a connector for the vette controller and wire it up or do something else?

[dave w]

So did you end up finding a connector for the vette controller and wire it up or do something else?

For the short term, I found a used Vette controller with the wiring.

The idea of having two fans, one for a transmission cooler and the other for the engine is gaining traction with the vehicle owner.

dave w