NEED BIN FOR 89 CHEVY 350 TPI MILD CAM AND HEADERS 3:27 GEAR

[carcaper]

Anyone know of a good starter BIN FOR 89 CHEVY 350 TPI 3:27 gear MILD CAM AND HEADERS that fits 1227165_16k_$6E ?

Another question I had was where will I be able to change the gear ratio in the definition?

It was suggested I use $6E instead of 32B because of baud rate and more friendly but now i won't have a baseline.

I downloaded a few that are labeled 89 vet and 1227165 but not sure how generic they are.

I'll keep trying with these first and check back.

Thanks in advance

[dave w]

I think you might have these already?

dave w

[EagleMark]

Although the bins seem to be all labled with gear ratios there is nothing in the ECM to adjust for gears.

Isn't it common for $6E guys with the old style MAF to convert to $8D Speed Density? I've never done a $6E car hands on but the guys I've helped were frustrated with intermittent data issues along with MAF issues. Data issues is all I remember about $6E...

IIRC that is also an ECM that can convert to the Aussie $12P, or Dynamic EBL.