7747 $42 ADSZ bin

**sciroc** · 03-25-2014

Just opened up my ECM to install my new Moates adapters. My stock prom has ADSZ then 3348 under that. Wouldn't that be my bin code and if so I can't seem to find it on any of the usual bin libraries. Just thought it would be cool to see what it had from the factory. I have switched from a 305 TBI to a 350 so I am going to have to start burning proms hence the Moates gear.

**EagleMark** · 03-25-2014

ADSZ is for a 5.0L Auto in a R2, V1 vehicle. It's a good BCC with no superseded so read it and save it and we will add it.

Don't forget to set the offsets properly to read stock chips and burn 27SF512 chips:
http://www.gearhead-efi.com/Fuel-Inj...Flash-and-Burn

**sciroc** · 03-26-2014

Which chip is this? I don't see it on the other link you posted. How do I post a pic on here?

**sciroc** · 03-26-2014

picture077.jpg picture074.jpg picture073.jpg

Thank you...here are the pics

**EagleMark** · 03-26-2014

When you reada it we want the bin file, no need for pictures. It's a 2732a chip.

**sciroc** · 03-26-2014

Here is the ADSZ bin

As a trade

... what would be a good bin to start with for my application. I have a 87 Silverado V-10, stock 400 trans, 3.08 gears just replaced the stock 305 with a GM 350 crate motor, 260hp/350tq, I have installed 350 injectors, rebuilt the TBI unit, removed the air pump and blocked off the EGR. Haven't did anything else. Wanted to get a good tune in her and just enjoy the ride.