Page 1 of 2 12 LastLast
Results 1 to 15 of 25

Thread: 68 camaro 5.3 with whipple sidemount supercharger

  1. #1
    Fuel Injected!
    Join Date
    Feb 2014
    Age
    48
    Posts
    21

    68 camaro 5.3 with whipple sidemount supercharger

    hi new to tuning i have a stand alone harness it runns fine to about 4500 then it just quits pulling ive tried everything i can think of any help would be apperciated
    Attached Files Attached Files

  2. #2
    Fuel Injected! Lextech's Avatar
    Join Date
    Oct 2012
    Location
    Oak Forest, Illinois
    Age
    60
    Posts
    148
    According to the title of your tune, you are boosted. Your tune is set up for a 1bar MAP sensor and has no boost enrichment. You should be running COS3 and a 2 bar MAP sensor and giving it some more fuel and backing off of the timing a bit above 105 KPA.
    You need to get this sorted out before you pop the engine. You are probably very very lean.

    Jeff
    Last edited by Lextech; 02-22-2014 at 06:10 AM.
    98 GMC RCSB, 5.0, 4L80e, Moser M60, 4.10 gear, Homemade twin turbo w/Junkyard T3 turbos, 24x CNP, 12200411 PCM.

  3. #3
    Fuel Injected!
    Join Date
    Feb 2014
    Age
    48
    Posts
    21
    how can i set it up for the boost enrichment

  4. #4
    Fuel Injected! Lextech's Avatar
    Join Date
    Oct 2012
    Location
    Oak Forest, Illinois
    Age
    60
    Posts
    148
    Open up your tune in EFILive then go to the top and open the Help tab. Then go to Turorials on open the Custom OS upgrade tutorial LS1. Read and follow that PDF. You will also need a 2 Bar MAP sensor and set table C6301 to 190. Make sure you have enough injector to fuel that setup.

    Jeff
    98 GMC RCSB, 5.0, 4L80e, Moser M60, 4.10 gear, Homemade twin turbo w/Junkyard T3 turbos, 24x CNP, 12200411 PCM.

  5. #5
    Fuel Injected!
    Join Date
    Feb 2014
    Age
    48
    Posts
    21
    i maybe in over my head that looks complicated

  6. #6
    Fuel Injected!
    Join Date
    Apr 2013
    Posts
    121
    Quote Originally Posted by danny68ss View Post
    i maybe in over my head that looks complicated
    Print the COS Tutorial ... read it several times ... and make some notes about the necessary steps. It is actually very straight forward.

    Do you have a 2 bar (or 3 bar) MAP sensor fitted ? The stock 5.3L 1 bar MAP is useless under boost conditions.

    If you are using EFILive for this project, you may want to consider posting on their Forum to get support with respect to the COS upgrade.

  7. #7
    Fuel Injected!
    Join Date
    Feb 2014
    Age
    48
    Posts
    21
    yea it still has the 1 bar going to order the 2 bar today and try to get this figured out i have the same set up on my silverado ss it works fine on it guess just got lucky with it but this one flattens out around 4500

  8. #8
    RIP EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    63
    Posts
    10,477
    You really need the Custom Operating System and 2-3 bar MAP to tune it properly... as stated already.

    You may just be lucky it worked on the other setup? Maybe it's melting slowly? It's not tuned correctly though.

    This new one may be just running out of fuel? For what ever reason it does not matter, you should stop!

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

  9. #9
    Fuel Injected!
    Join Date
    Feb 2014
    Age
    48
    Posts
    21
    ordering 52 pound injectors and a map sensor now just ran off the instructions for the custom os might need alittle help setting it up but im going to give it a shot

  10. #10
    Fuel Injected! Lextech's Avatar
    Join Date
    Oct 2012
    Location
    Oak Forest, Illinois
    Age
    60
    Posts
    148
    Make sure you get injector data that can be understood and entered into the calibration.

    Jeff
    98 GMC RCSB, 5.0, 4L80e, Moser M60, 4.10 gear, Homemade twin turbo w/Junkyard T3 turbos, 24x CNP, 12200411 PCM.

  11. #11
    Fuel Injected!
    Join Date
    Feb 2014
    Age
    48
    Posts
    21
    it says they come with a flow sheet my truck has 52s in it i hope i can copy its tune to get me started if its not locked

  12. #12
    Fuel Injected! Lextech's Avatar
    Join Date
    Oct 2012
    Location
    Oak Forest, Illinois
    Age
    60
    Posts
    148
    The tune you posted here is a 2004 truck calibration in a 1mb PCM. Does your truck have a 2004 COS?

    Jeff
    98 GMC RCSB, 5.0, 4L80e, Moser M60, 4.10 gear, Homemade twin turbo w/Junkyard T3 turbos, 24x CNP, 12200411 PCM.

  13. #13
    Fuel Injected!
    Join Date
    Feb 2014
    Age
    48
    Posts
    21
    no i dont think so i know it has a stock map sensor

  14. #14
    Fuel Injected!
    Join Date
    Feb 2014
    Age
    48
    Posts
    21
    how do i get into the custom os

  15. #15
    Fuel Injected! Lextech's Avatar
    Join Date
    Oct 2012
    Location
    Oak Forest, Illinois
    Age
    60
    Posts
    148
    Quote Originally Posted by danny68ss View Post
    How do I get into COS3?
    Here is your tune converted to "04073003". Which is a 2004 COS3. It is set up as a 5.3, M/T, DBW---STARTER TUNE. I set the MAP scaler to 190 for a 2bar MAP sensor. If you use a different MAP Sensor you will need to scale table C6301 accordingly. I scaled up table A0009 by 35%----Just as a starting point. You will need to input your injector data into the tune when you get your new injectors. You will need to "Full Flash" this calibration into your PCM when you are ready. You will need a good Wide Band O2 Sensor to input into your tuning logs. You should be spending a LOT of time on the EFILive forum in the Gen3 and Forced Induction Sections as well as studying the tutorials.
    Jeff
    Attached Files Attached Files
    98 GMC RCSB, 5.0, 4L80e, Moser M60, 4.10 gear, Homemade twin turbo w/Junkyard T3 turbos, 24x CNP, 12200411 PCM.

Similar Threads

  1. Looking for camaro V6 manual bin
    By Playtoy_18 in forum GM EFI Systems
    Replies: 3
    Last Post: 11-11-2013, 03:16 PM
  2. Whipple Tbi
    By roughneck427 in forum Buy - Sell - Trade - Wanted
    Replies: 5
    Last Post: 10-31-2013, 03:27 AM
  3. NEED BIN FILE FOR 1990 CAMARO
    By 1227730 IROC in forum Introductions
    Replies: 2
    Last Post: 08-23-2013, 08:04 PM
  4. TBI Whipple Cam Selection
    By Cadride in forum GM EFI Systems
    Replies: 14
    Last Post: 05-30-2013, 10:09 PM
  5. '87 Camaro manual 5.7 -- bin to use?
    By brianko in forum GM EFI Systems
    Replies: 15
    Last Post: 11-15-2012, 09:54 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •