Results 1 to 7 of 7

Thread: 7747 est module?

  1. #1
    Fuel Injected! jameslleary's Avatar
    Join Date
    Apr 2011
    Location
    Patterson, Ca
    Posts
    269

    7747 est module?

    hey guys!
    waiting for my new Delco est module from rock auto to complete my tbi swap. in the event i finish everything before it arrives, wil i be able to start and run it in the driveway?

  2. #2
    RIP EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    63
    Posts
    10,477

    Re: 7747 est module?

    Nope. Injectors won't fire besides no spark.

    Don't try to run a wire to ECM to produce a signal that comes from EST. You will burn up the ECM... yes I tried a long time ago...

    Here's how it works.
    [attachment=1:2ilwzamy]gm-ign-module-schm.jpg[/attachment:2ilwzamy]

    It's a modified signal to square wave, without the EST for a fuel only sytem you need a tach filter.
    [attachment=0:2ilwzamy]Tach%20Filter2.jpg[/attachment:2ilwzamy]
    Attached Images Attached Images

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

  3. #3
    Fuel Injected! jameslleary's Avatar
    Join Date
    Apr 2011
    Location
    Patterson, Ca
    Posts
    269

    Re: 7747 est module?

    woops...i meant esc module.....dist has the est in it already.

  4. #4
    RIP EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    63
    Posts
    10,477

    Re: 7747 est module?

    D'oh!

    You got me? I know you can wire without ESC and knock, but to just have it disconnected? Curiousity got me so I looked at a wiring diagram and I would say yes it will run! Should set a code...

    [attachment=0:1jda2scm]747ecm5.jpg[/attachment:1jda2scm]
    Attached Images Attached Images

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

  5. #5
    Fuel Injected! jameslleary's Avatar
    Join Date
    Apr 2011
    Location
    Patterson, Ca
    Posts
    269

    Re: 7747 est module?

    looks like i will be wiring my large cap distributor for the tbi as well, that baby just barely clears the air cleaner, but the small cap dist that i have does not turn too freely.

  6. #6
    RIP EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    63
    Posts
    10,477

    Re: 7747 est module?

    If you soak the shaft in brake clean and clean out the sludge, then remove the gear and work out the shaft for final cleaning, then oil it up they are usually fine. While it's apart you can replace the pickup coil for about $6.

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

  7. #7
    Fuel Injected! jameslleary's Avatar
    Join Date
    Apr 2011
    Location
    Patterson, Ca
    Posts
    269

    Re: 7747 est module?

    my big dist. is brand new. clears the air claener, better than it cleared the tpi upper plenum.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •