Need some help using Mode 3 -- using TunerPro RT v5; AUJP $8d. Have attached pics of what doesn't work. It appears to mimic that used for Mode 1 that works.
Trying to get values for 3 variables only, excluding everything else: 0x00A2, 0x0045 and 0x00A4. Am sending: 0xF4 0x5C 0x03 0x00 0xA2 0x00 0x45 0x00 0x45 0x22
using a macro that first uses the above in a Send command and then executes a Reply command that waits for the data
where:0xF4 = Device ID
0x5C = Msg Len = (2 * 3 bytes) + 1 + 85 = 92 = 0x5C (is this correct?)
0x03 = Mode 3
0x00 0xA2 = MSB LSB of 1st variable
0x00 0x45 = MSB LSB of 2nd variable
0x00 0xA4 = MSB LSB of 3rd variable
0x22 = 2's complement checksum of the above (is this correct?)
The only differences from Mode 1 appear to be message length and checksum. What about the Reply command Body and Payload values. Are they correct?
Bookmarks