Results 1 to 3 of 3

Thread: 7427 #0D xdf question?

  1. #1
    Electronic Ignition!
    Join Date
    Jan 2014
    Posts
    11

    7427 #0D xdf question?

    Hey new to the forum. But some great info hear.. Its been a few years since i tuned a tbi system. And was just wondering if someone can clarify If the $0D XDF from moates site has the Spark bias added to the main spark tables or subtracted?? Meaning that when looking at the table, is it actuall crank timing or is there 9.84deg added to it with the bias etc??
    Just tuning a freinds stock rebuilt 350 and looking to get a little more HP and mileage out of it etc.. Or if someone has a good spark tables to use as a starting point etc.. The vortec timing table looks like it might be ok?

    This is in a GMC 1500 4x4 etc.. Thanks again and appreciate the help.

  2. #2
    RIP EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    63
    Posts
    10,477
    I'm not sure what version Moates had when they stopped hosting files. We now have all of the Moates filman files but nothing has been touched since then.

    The updated files do take into consideration Bias and show actual spark timing. They are here:
    http://www.gearhead-efi.com/Fuel-Inj...Information-OD

    Vortec table on TBI heads may be a little much even with high octane fuel, so watch the knock counts and pull in areas showing increased knock counts and spark retard.

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

  3. #3
    Electronic Ignition!
    Join Date
    Jan 2014
    Posts
    11
    Excellent thank you very much!

Similar Threads

  1. 7427/700R4 TCC question
    By Nasty-Z in forum GM EFI Systems
    Replies: 4
    Last Post: 01-31-2014, 06:28 AM
  2. 305 tpi with 7427 pcm Possible?
    By Aholt91ss in forum GM EFI Systems
    Replies: 67
    Last Post: 08-25-2013, 02:12 AM
  3. Calling all '7427 guys: Knock Sensor question
    By CDeeZ in forum GM EFI Systems
    Replies: 4
    Last Post: 08-08-2012, 04:15 AM
  4. 7747 ECM to 7427 PCM question re: power feed
    By belaw in forum GM EFI Systems
    Replies: 6
    Last Post: 07-31-2012, 05:40 AM
  5. GM '7427 PCM / Jeep Wrangler question
    By Nasty-Z in forum GM EFI Systems
    Replies: 2
    Last Post: 05-25-2012, 06:32 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •