ok, so I am trying to get familiar with TunerPro and I have the most recent .xdf file and I am using a bin called 8cyl.bin that I got from the forums. I want to disable the egr, so i maxed to temp as to never allow it to come on. I now want to disable the knock sensor because we unfortunately do not have any room for a knock sensor because of the clearance from the heads. My question is: How do I disable the knock sensor using TunerPro? I did not see an option under the scalers parameter? Am I not looking closely enough or is there another way to do this? I also want to start making changes to .bin file that is factory as a starting point. Where would I find a .binfile that is not been modified already. I would us my own but my burner is not here yet and I am trying to get familier with TunerPro before my Burn2 gets herer. Any help on this would be great. Thanks.
Bookmarks