Delta force tuning software/interface.

[delcowizzid]

looks like some moates.net gear in amonst it

[Playtoy_18]

I've read thru the forum,lots of people swapping onto new computer and besides driver issues i'm getting it will install on win7.
Talking with them on facebook trying to get drivers,couldn't get forum registration to go thru.

[mekkis]

looks like some moates.net gear in amonst it

Moates makes their chips, maybe other hardware.

LMK if you need any Ford help. I've not used Sniper/DF, but half my parking lot is Ford.

[doctortuned]

I use it. I have the older interface and the the newer v23. Along with the mac 10 interface. I have the full custom tuning deltaforce software. It is not transferable. If you look at westers garage he uses the same software just with his name on it. Like the tunercat program. I have tuned about 1000 fords with it. I even can sell you the bullet vins for it. Just like any program there are advantages and disadvantage. I like it because I don't have to sell my customers a handheld on each tune. And If you return a vehicle back to stock. You will get your bullet back. Even with just the interface you can change base parameters like a handheld with your laptop. But for custom tuning you will need the full df program. I think its around 3500.00 I have it. I bought it years ago. If Anyone needs a custom file built I can help them.

[Montecarlodrag]

When I was doing my research for options to tune Ford vehicles, I found bad things about that software and their customer service:

http://www.pcmperformance.com/fordprog.html

http://www.snipertuningforums.com/viewtopic.php?t=5220

This is what drove me away from that and I ended buying a better solution. Very happy with it

[Playtoy_18]

What was your better solution?

I've yet to mess with this,they sent me the files needed but haven't had any time or interest enough to pull it out and play with it.
If I don't get around to it soon i'll just put it on ebay probably.

[Munchies]

Is the interface cable a relabled AVT product then?
Does the flashing happen via the tuning software or is there a flashing tool that talks to the cable?

[doctortuned]

The box is the flashing device. You have to purchase bullet or credits. And then you. Read the file with the box. Load it in your pc. Get the template code. And then tune off that. you have to run a few programs. 1 allows you to add credits, another reads and writes to the flash box. And the other is your tuning program. One big downfall. if you tune a vehicle. Then later the customer comes back. You have to have the file on your pc. You cant read the file unless you buy another crrdit.