Results 1 to 6 of 6

Thread: 0411 PCM - Wide Band Output

  1. #1
    Fuel Injected!
    Join Date
    Jul 2012
    Posts
    22

    0411 PCM - Wide Band Output

    I'm sure this has been asked/answered before but I can't seem to find it. I'm in the process of creating a wiring harness for my LS4. My 0411 came out of a 2001 S-10 4.3. I believe I have all the unused pins removed and all the needed pins added at this point. I almost forgot about my wide band and providing a pin for it so I can datalog with TunerPro. What pin is everyone using for their wide band signal?

    Thanks!

    Scott

  2. #2
    RIP EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    63
    Posts
    10,477
    The only ADX file I know of for TunerPRo uses the AVT-852 cable which has AD input ports installed so you wire the WB directly to it.

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

  3. #3
    Fuel Injected!
    Join Date
    Jul 2012
    Posts
    22
    Quote Originally Posted by EagleMark View Post
    The only ADX file I know of for TunerPRo uses the AVT-852 cable which has AD input ports installed so you wire the WB directly to it.
    Shit, I didn't realize that. I got an ADX off the pcmhacking site a few years ago along with a cheap ELM cable and was able to log my friends 96 LT4 Vette with Tunerpro 5. It was pretty simple but it wasn't configured to log a lot of information. I wonder if the ADX for the AVT-852 could be used to extend the one I used?

    Thanks for the reply.

  4. #4
    RIP EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    63
    Posts
    10,477
    I think the adx files are different for ELM and AVT? Not sure.

    Jayme has done some sweet work to the AVT cable ADX file. He keeps adding so the newest version can always be found in the top post here:
    http://pcmhacking.net/forums/viewtopic.php?f=10&t=2314

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

  5. #5
    Fuel Injected!
    Join Date
    Jul 2012
    Posts
    22
    Did some further searching and found the thread I was looking for. I think the last post in this thread gives some hope. :)

    http://pcmhacking.net/forums/viewtopic.php?f=10&t=1320

  6. #6
    RIP EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    63
    Posts
    10,477
    That's the link I gave you above...

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

Similar Threads

  1. AFR Gasoline - E10 Wide Band 02 sensor tuning using Lambda
    By EagleMark in forum Fuel Injection Writeups Articles and How to New and Old
    Replies: 14
    Last Post: 11-07-2013, 08:26 PM
  2. Replies: 7
    Last Post: 07-22-2013, 06:02 AM
  3. Wide Band O2 / Narrow Band Combo?
    By fallflight in forum GM EFI Systems
    Replies: 26
    Last Post: 07-02-2012, 06:30 PM
  4. Wide band decisions...
    By Six_Shooter in forum Gear Heads
    Replies: 19
    Last Post: 03-24-2012, 02:55 AM
  5. Which wide band O2 set up works with Tunerpro RT?
    By mudbuggy in forum GM EFI Systems
    Replies: 18
    Last Post: 12-30-2011, 04:04 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •