Results 1 to 15 of 29

Thread: 12200411 set up for 700R4

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    RIP EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    63
    Posts
    10,477

    12200411 set up for 700R4

    I'd like some help in setting up a 12200411 LS1B PCM for 700R4. I've done this before but forgot what I had to do? This one is a little more complicated by VSS that is an 8. So need to calculate that for proper speed which is needed for the TCC operation.

    Yes I know someone would do it for me, but that's not what I'm looking for. Looking for the knowledge to do it correctly and understand changes needed. This one will be done in EFI Live and the RoadRunner.

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

  2. #2
    Fuel Injected!
    Join Date
    Apr 2013
    Posts
    121
    Hi Mark,

    Post the base tune you will be beginning from (in *.tun format) and I will work through the changes with you. I should have time to reply back and forth with you this weekend ...

  3. #3
    RIP EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    63
    Posts
    10,477
    Thanks Buzz! This should be a good lesson!

    Truck should be here tomorrow for the weekend so I can read it.

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

  4. #4
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,268
    I'm wondering if the 700R4 has been modified? I've worked with a few 700R4's that had some internal wiring modifications done to allow a manual toggle switch to lock up the torque converter.

    What I remember about OBD I 700R4 TCC control ... when the 4th gear switch closes a ground is sent to the ECM. The TCC solenoid gets power from the brake switch. When all programmed parameters are qualified (usually TPS / MPH), the ECM will apply a ground to the TCC solenoid.

    I'm thinking EFI Live can be programmed to 100% PWM Min / Max for TCC control. I'm thinking MPH can be programmed for TCC lock up. I'm thinking most LS1B wiring I've worked with have Red 42 as TCC control.

    dave w

  5. #5
    RIP EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    63
    Posts
    10,477
    It's a stock 700R4 that came in the 1990 Blazer. Not sure what he did with the wiring yet? The only thing I did a few months back was remove VATS when he was installing the engine. It does run and drive.

    For the VSS, it's a Dakota digital 8k on NP208/700r4 adaptor.

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

  6. #6
    Super Moderator
    Join Date
    Mar 2011
    Location
    Camden, MI
    Age
    35
    Posts
    3,026
    i don't know if referring to full-size blazer or the S10 blazer, but in either case.... looks like the same diagram used between a 4.3 blazer S10 and a 5.7 full-size S10.

    can probably ignore the TH400 section.

    brake switch is wired in series with the TCC solenoid, so brake application should always disable TCC, otherwise some kind of trans issue exists and is keeping it engaged.

    the way the temp and 4th gear switches are setup in the other diagram are kind of confusing, but maybe there is some reasoning behind it? not enough digital inputs available to watch them seperately?

    http://imgur.com/f7drJku,4MzqsK8
    1995 Chevrolet Monte Carlo LS 3100 + 4T60E


Similar Threads

  1. Replies: 13
    Last Post: 02-05-2019, 10:13 PM
  2. 12200411 - A Few General Questions
    By ezobens in forum OBDII Tuning
    Replies: 69
    Last Post: 08-03-2018, 05:18 PM
  3. 12200411 Timing Advance Impass Reached
    By Fast355 in forum OBDII Tuning
    Replies: 10
    Last Post: 10-07-2013, 05:27 PM
  4. 16197427 and a 700R4 ?
    By EagleMark in forum GM EFI Systems
    Replies: 57
    Last Post: 10-21-2012, 02:18 PM
  5. 454 / 700r4
    By Nasty-Z in forum GM EFI Systems
    Replies: 4
    Last Post: 05-04-2012, 02:48 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •