Bringing TBI and Multi Port Fuel Injection to a New Level.     EFI Conversions and Tuning! Seattle to Portland! E-mail Tuning Consultant!
Results 1 to 5 of 5

Thread: 93 S10 4.3 TBI 8625 ecm tuning

  1. #1
    Carb and Points!
    Join Date
    Aug 2013
    Location
    Conroe, Tx.
    Age
    42
    Posts
    8

    93 S10 4.3 TBI 8625 ecm tuning

    Okie Dokie, I have a 93 S10 2wd with the 4.3/4l60e setup and I have a pile of parts to make some upgrades for better power and mpg. Truck isnt my daily, but more of a parts runner and tow rig for my 79' Witchcraft 21' boat.

    My truck has the 8625 ecm in it, and one of my main questions is what do i need to do for this ecm to control a 2 speed taurus electric fan? If this is even possible?

    Im going to be upgrading the engine with some 94 L35 CPI heads and cam along with some 1.6 roller tip rockers, an edelbrock 3713 TBI intake, Edelbrock TES headers and rpm cat-back exhaust. I already have a 2.5 high flow cat on the truck. The taurus efan, some underdrive pulleys. Going to completely reseal the engine while its out.

    I have used the autoprom on a 92 typhoon I had back in 06/07 so im not completely new to tuning just never tried to get one of these OBD1 ecm's to control the fan. If Dynamic EFI's EBL setup would control the trans id be going that route, but dont want to mess with having two ecms and two tuning setups just to tune the engine and trans.

    Thanks for any and all help with this project.
    1992 GMC Sonoma GT
    #492 of 806 Built
    Moth Balled Since 2003

    1992 GMC Sonoma GT
    #003 or 806 Built
    Turbo 4.3
    In Progress

    2000 Tahoe Limited
    Daily Driver
    454/4L80e Swap in Progress

  2. #2
    Fuel Injected! jim_in_dorris's Avatar
    Join Date
    Dec 2011
    Posts
    775
    The 8625 ecm will run $0D code and here is how to control fans courtesy of some really smart guys.

    http://www.gearhead-efi.com/Fuel-Inj...D-efan-control
    Square body stepsides forever!!!

  3. #3
    Fuel Injected! JeepsAndGuns's Avatar
    Join Date
    Sep 2011
    Location
    alabama
    Age
    35
    Posts
    1,668
    I tried and tried to get that code working but never could, and without the author of the code to help, we could not figure out the issue. Read through the thread to see.

    I ended up using the code from FSC, it works great, but I am running a single, 1 speed fan. So no dual speed controll with it, but I can confirm it works great.
    http://www.gearhead-efi.com/Fuel-Inj...E-Efan-control
    79 Jeep Cherokee, AMC 401, T-18 manual trans, hydroboost, 16197427 MPFI system---the toy

    93 Jeep YJ Wrangler, 4.0L, 5 speed, 8.8 rear, homebrew hub conversion and big brakes, hydroboost, 2.5in OME lift, 31x10.50's---the daily driver

    99 Jeep WJ Grand Cherokee limited, 4.0L, auto, 2wd, leather and power everything, 99% stock---the long distance highway ride.

  4. #4
    Carb and Points!
    Join Date
    Jan 2014
    Age
    31
    Posts
    1
    I have a question for you ECM guys. I have a 93 GMC with a tbi 4.3L in it but am going to swap to a tbi 350 V8 come Dec. I thought that the ECM was going to have to be changed to a 350 but I am being told that my ECM can just be programmed (flashed) with a 350 code and i should be good to go.

  5. #5
    EFI GearHead ! EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    57
    Posts
    10,477
    Your getting better at Spamming us with a link to your products! Why not just pay to advertise and then feel free to show them off and talk about them?

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

Similar Threads

  1. 6395 7427 8625 Manual Trans Calibration Listing
    By 1project2many in forum GM EFI Systems
    Replies: 10
    Last Post: 02-08-2012, 08:07 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •