Now that I have the 7427 pcm in and running, and getting the hang of tuning it, I am ready for the next step, mod a intake and convert over to batch fire MPFI with this 16197427 pcm.

So, what are we limited to, as far as injectors that would be compatable? I would think the injectors ohms would have something to do with it?
If at all possiable I want to run EV6 style injectors with the nice 4 hole spray pattern.
I have quite a few (12 actually) of the dodge neon 0280155703 injectors laying around. (running these in the 4.0 in my 93 wrangler and love them) They are the EV6 4 hole pattern injectors.
I measured them and they are 12.5 ohms (plus or minus .1) They flow 238cc/min at 3 bar, witch according to the calculators online I have found, would flow about the right ammount for my engine at around 39-41 psi.

So what says the experts out there? If not, what other options do I have, that are roughly the same flow rate?