steveo, seen your posts on other forums. I have an early 94 trans-am 12 pin ALDL
tunerpro header shows (binfile-94TA.1bin XDF file $EE-16188051.xdf ADX file-$EE-16188051-V3.2 )
program shows on item list engine data, transmission data, engine MALF codes, transmission MALF codes
I have used datamaster it does show trans stuff temp. gear,ect,ect
when I try to use a different XDF file I do see there is a different drop down menu in the items list
Am I doing something wrong.
problems on car are; TCC stuck on (datamaster error code 83 TCC Control feedback Fault) only 1 code on car
DERM module also appears to be bad. I pulled dash cluster and found 3 bulbs missing ABS,Low fuel,oil change
ordered some be here soon
lets stay on target, started using tunerpro so I could see more detailed data on trans. before pulling pan to look at shift solenoids and TCC. I thought that this would be smarter approach than old school test procedure
(take out and test) need to go to junk yard for trans harness for on car solenoids test.
Bookmarks