Figured I'd start my own thread for my logging, questions, ideas, tuning for my project. Any questions or ideas or thoughts I'll put here.

So a little history,
85 k5 I'm building for crawling and off road fun. Has a GM 350 HO that I've retrofitted with a 90 suburban 3/4 ton TBI. Using a harness from affordable fuel injection that removes the VSS and knock sensor and no EGR. ECM is 1228747 with the mods I've needed to do to be able to burn my own chips. Non computer 700R4. Its currently running ok but I know there's room for big improvement. IIRC I'm using a stock bin for a 7.4 with 4 speed auto. I'm now looking into using the stock 5.7 manual bin to tune off of. For the first chip I've smoothed the VE table and a smoothed timing table with a flattened idle area. I've turned off EGR, knock retard, and VSS. Seem like a good start bin to tune off of?