Results 1 to 15 of 18

Thread: Is there an Oil Pressure and Water Temp. output signal on 95 LT1 PCM ?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 12-20-2013 #1
    nchittman
    nchittman is offline
    Electronic Ignition!
    Join Date
    Dec 2013
    Age
    55
    Posts
    13
    Just looked at some 95 & 97 Z28 camaro insturment cluster on ebay and both definnetly have Oil Pressure gauges. So the output from the sensor only goes to gauge cluster. The link to the AC Delco Oil Pressure sender/switch also fits 94 thru 97 Camaro's , Firebirds and Vetts.

    I agree that they have nothing to do with the PCM.
    Last edited by nchittman; 12-20-2013 at 04:32 AM.
    Reply With Quote Reply With Quote
« Mimic A/C control canbus signal to PCM | LS1 Swap into 1992 Chevy Pickup »

Similar Threads

  1. spark advance temp.correction vs.load vs.temp
    By myredprky in forum GM EFI Systems
    Replies: 0
    Last Post: 11-06-2013, 04:47 PM
  2. Why do I not have 5v coming from B12 (MAF Signal) at the ECM?
    By BurgerWorld in forum GM EFI Systems
    Replies: 50
    Last Post: 08-30-2013, 07:41 PM
  3. PWM Electric Water Pump control
    By gregs78cam in forum Gear Heads
    Replies: 12
    Last Post: 05-28-2013, 01:51 AM
  4. VSS Input/Output Limit?
    By yelruhde in forum GM EFI Systems
    Replies: 6
    Last Post: 06-29-2012, 05:16 AM
  5. Your food and water is designed to kill you slowly...
    By EagleMark in forum Gear Heads
    Replies: 0
    Last Post: 03-21-2012, 08:41 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules