ok Im hooked on doing this
67 f 100
71 (335) series 400 engine 9/1 compression from a galaxie 500 C6 trans mission

my cousin owns a wrecking yard I have my choice between a 91 1500 pick up and 93 1500 conversion van to pull the wiring from
both have 350 engines

I plan on using a plug and play distributor http://www.ebay.com/itm/Big-Block-Fo...a094d9&vxp=mtr

that uses a GM big cap will this work?

is are the injectors from a 350 big enough? or will I need larger ones?

my fuel tank does not have a return line Im going to have to get creative suggestions please
will I need to run 2 ox sensor's ?

my guess is that trans is no issue? speed sensor off cable to speedo

what am I missing?