Results 1 to 9 of 9

Thread: 747vs288

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Fuel Injected!
    Join Date
    Sep 2012
    Location
    washington indiana
    Age
    69
    Posts
    884

    747vs288

    I posted about getting a new used 747, I could never get my 747 to get the milage my 288 does. I have been playing today and on a level straight hyway 70mph 747 map 70.6 288 62.4 map kpa both are fairly good tuned chips same driving condition wind and all tempetures . if this interests you and you have a 288 it my do better in a v8 I have a v6. burn you a been and see if the 288 runs at a lower map than the 747, there is something different in the two ecms that make the 288 run at a lower map what I don't know 2 mpg differents at nothing to laugh at.

  2. #2
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,308
    I'm thinking the major difference between 1227747 and the 16144288 would be the maximum RPM for fuel mapping. Maybe there are some differences in the spark mapping also. The 16144288 has only one VE table. There could be differences in the injector drivers, but I'm just guessing.

    dave w
    Attached Images Attached Images

  3. #3
    Fuel Injected!
    Join Date
    Sep 2012
    Location
    washington indiana
    Age
    69
    Posts
    884
    I bet your right dave, I have never seen a 288 in a v8 truck this is at 70mph -2050-2100 rpms its just puzzling what the differents is.

  4. #4
    Fuel Injected!
    Join Date
    Jul 2013
    Location
    Newzealand
    Posts
    483
    the timing will be your gain in vacuam.i normally adjust cruise timing live on the move and increase timing while watching tps and map.adjust timing to lowest tps and most vacuam to sustain current rpm/mph.youll be wurprised how much fuel consumption goes down when you cruise with lower tps and higher spark/lower fueling in the lower map regions.

  5. #5
    Fuel Injected!
    Join Date
    Sep 2012
    Location
    washington indiana
    Age
    69
    Posts
    884
    thanks for the help, I have to pull my chip to change it I will ad a little timming at cruise speed an see what happens.

  6. #6
    Fuel Injected!
    Join Date
    Sep 2012
    Location
    washington indiana
    Age
    69
    Posts
    884
    sure wish I could apply the lean cruise patch to the 288 with parimiters to ajust it. unless you was driving this truck you would not belive the differents of the 2 ecms.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •