Need some help with understanding the DFCO.

[ony]

your map is not going low enough for devco. try this bin I changed the v1 table where the cells was filled long enough. I don't know what you are running but very few knocks for that much timming, have you got a distributor or a moudule distributor less engine?

[damanx]

Ony,

Running a 3.4 with the 2.8 distributor and 7747 ecm.

Using that bin due to the better performance so far because of what I believe to be the Spark Latency tables and what not matching up better with the 2.8's.

Will try that bin and see what happens.

Thanks!!