Hello guys i'm hoping some of you can help me out.

My father and I are building a street rod out of my 49 Studebaker pickup.

We got a engine out of a donor truck that we want to use. I just need some help on knowing exactly what wires and sensors i'll need to make the truck run. here is the details:

Donor motor:

350 cu in. 5.7L V-8 with Rochester TBI EFI Out of a 1990 Chevy c1500 Truck 700R4 automatic transmission

Mods i'm doing to the engine:

Converted to short water pump, V-belt system.
Removed A/C and Power Steering
Keep OEM alternator\
Block hugger headers
Changing Valve Covers
Changing Air cleaner
Switched to Mechanical Speedometer
Not using the OEM braker booster and master cylinder with electronics
Not using Cruise control
Not using electric wiper motor

There is a pile of wires and we plan on running a seperate wiring harness and fuse block for things like lights, radio, wipers, gauges. We just need to know what wires, sensors, and plugs we need to not only get the motor to run, but run well. we have a motor manual, but are a little confused and see some wires we cant identify. Also we've seen some write ups and such online, but we aren't knowledgeable enough with EFI to know what some people are talking about sometimes.