Bringing TBI and Multi Port Fuel Injection to a New Level.     EFI Conversions and Tuning! Seattle to Portland! E-mail Tuning Consultant!
Page 2 of 2 FirstFirst 12
Results 16 to 21 of 21

Thread: Putting a GM TBI system on my 1972 Ford F-250

  1. #16
    Electronic Ignition!
    Join Date
    Aug 2013
    Age
    52
    Posts
    18
    Okay i got the first harness done today.I eliminated the EGR knock sensors an the ESC . These things will turned off when computer is reflashed. For timing control i'm using the ignition module out of the GM distributor along with the GM coil to. ok here some pics of the finished harness





    soldering wires
















    I got it stand alone 2 grounds 1 batt 1 key on source. I will be using 2 relays on thw batt an key on wired

  2. #17
    Electronic Ignition!
    Join Date
    Aug 2013
    Age
    52
    Posts
    18
    Okay with projects it seems like things always change or take a diffirent path .Well it has happened here Instead of doing my 72 F-250 first, i'm doing my 1978 Bronco with a 351m first


    .


    This is the empty shell waiting for body and paint work


    The harness i built seemed to fit perfectly so the rest of the parts i have collected over the last year for this GM TBI system are going onn the bronco . Don't worry I will still be doing the 72 F-250 it's just going to be awhile . I was able to get the throttle body mounted today on the edelbrock intake plus i got the map sensor mounted well i found a bracket that worked great so i used it , well enough babbling time for pics



    one free 5.7 throttle body mounted on trans adapt part# 2210



    had to trim bolts that hold throttle body to the adapter



    test fitting on motor








    map sensor bracket mounted



    I think it looks oh so pretty lol well still got some more things to get and the bronco needs a ton of work like rewiring the whole rig . im going to use the the wiring harness kit from speedway so i will keep you all posted

  3. #18
    Fuel Injected! mmigacz's Avatar
    Join Date
    Oct 2013
    Location
    Sheboygan Falls, WI
    Age
    43
    Posts
    158
    Looks awesome!

    Are going to use spark control? If so, are you interested in some helpful tips on modifying the Ford duraspark dizzy? Also, what:

    heads
    cam
    intake

    are you using? Parts of my tune might be helpful.

    Attachment 8786

    Attachment 8787
    Last edited by mmigacz; 03-29-2015 at 02:59 PM.
    1986 ski centurion boat, 351W, gt40P heads, edelbrock performer rpm, 1227747 ecm, 72 lb/hr injectors (@18 PSI fuel pressure), .490/.490 lift, intake 278 duration, exhuast 282 duration, 112 lobe separation

    1969 camaro, 355ci, performer RPM intake, camel hump heads, 1227747 ecm, 454 throttle body (@18 PSI fuel pressure),

    2016 Chevy Cruz

    2014 Chevy Silverado

  4. #19
    Electronic Ignition!
    Join Date
    Aug 2013
    Age
    52
    Posts
    18
    Yes i'm using the module out of the GM distributor with the GM coil I found a diagram on how to wire it to the ford duraspark dizy

    heads are stock

    cam stock

    intake edelbrock performer

    of course any help is always appreciated but the rig is a long ways from running i was just mocking everything up

  5. #20
    Electronic Ignition!
    Join Date
    Aug 2013
    Age
    52
    Posts
    18
    Okay its update time: I have been wondering how i was going to mount the coil and the ignition module. Then one day while i was working at the wrecking yard I saw a coil bracket out of a 97 suburban that had it's ignition module attached to the coil bracket well with a little modification i was able to mount it to the fire wall and fabbed up a piece of aluminum as a heat sink for the ignition module okay here are some pics









    coil bracket mounted on firewall bracket


















  6. #21
    Carb and Points!
    Join Date
    Oct 2015
    Age
    42
    Posts
    6
    awesome stuff

Similar Threads

  1. $EE EVAP system tuning
    By steveo in forum GM EFI Systems
    Replies: 12
    Last Post: 08-27-2013, 07:55 AM
  2. what do I start with on putting bin info on a new pcm lt1
    By swat455 in forum TunerPro Tuning Talk
    Replies: 0
    Last Post: 06-16-2013, 08:04 PM
  3. Vortec EGR System?
    By EagleMark in forum OBDII Tuning
    Replies: 40
    Last Post: 06-02-2013, 12:07 PM
  4. Chevy 454 Big Block TBI System
    By EagleMark in forum Buy - Sell - Trade - Wanted
    Replies: 3
    Last Post: 08-19-2011, 07:34 PM
  5. tuning GM TBI system WOT
    By Julian537 in forum GM EFI Systems
    Replies: 11
    Last Post: 04-12-2011, 07:36 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •