Hello the good news is I got the Highway lean cruise mode to work today and can see it come on with my wideband LM-1. Bad news is I can't adjust the AFR chart for highway mode and save it and burn it. I can only use the settings you originally entered. THis is what I am experiencing.

1. When I change the AFR in the chart I hit the save icon and it saves them in the chart. Once that is done if I go to the (Patches) and check the (HIWay lean cruise Esc patch) and it says "Indeterminate data does not match" so therefore HIway mode will not engage without this patch installed.


2.So if I re-install the patch it changes all the Air fuel numbers back to your settings. So basically I can't adjust them and use my own AFR ratio settings without loosing the (HIWay lean cruise Esc patch).


3. What am I doing wrong? ANy ideas? THanks I really want to use it as I am so close!!!!!


Brandon