Mods done, some time spent researching but would like to have discussion.

[weaz4200]

Hey, names Rob. Got a 92 Camaro with following mods...

---List of Engine mods---
305 CID
speed pro hypereutectic pistons
081 casting (305 HO heads) Mild port/bowl blend/gasket match (I & E)
LT1 camshaft
1 5/8 headers to 2 1/2 collector (shorties)
Carb'd intake (street dominator/TBI spacer)
Stock TBI (slightly ported)/ stock injectors (i believe #55's)
Open element air filter

AIR delete
EGR delete

---Tuning equipment---
All Moates equipment
Burn2 programer
aldu1 and cabl1
G2 Mem adapter .060" leg spacing
Tuner Pro RT (donation made)
5 starter C2 SST 27SF512 chips
(and free moates stick (most important.. LOL))

1228746 ECM /$61 Mask

Spent some time in different forum reading through stickies and what not, but I have quite a few questions that need answers (every now and then) so I can move forward in my PROM Tuning learning. So hopefully we can get a discussion going and get a nice steady learning curve goin.

So I've messed with Tuner Pro RT a bit just to get affiliated, logged a few runs with WINALDL... Made some changes to my VE1 and VE2 tables.. Would like to have them checked out to see if anything is way off and maybe throw out a few questions I may be stumped on eventually... Here's what I've come up with so far. (see attachments. 1 stock and 2nd moddified) Lemme know what ya think. (cant seem to get bigger images... :/)

Thanks,
ROB

rob stock ve tables.jpg

rob modded ve tables.jpg