Here is what I am using, bin, xdf, adx and a log for example.
ETA:
Figured out that the 5.7 xdf works, but the 5.9 doesn't for some reason.
ETA AGAIN!!!
Ok, figured out that the 5.9.3 xdf "Da Association" "X Axis Da link" was not assigned to Map Kpa.
Assigned it and all is good.
Last edited by damanx; 10-23-2013 at 03:11 AM.
Which parameter table needed fixed?
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
Found it! "Fuel VE 1 - Main Fuel Table Corrected"
Thank you!
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
eta, you beat me to the reply....
You know that is the wrong one to use with Daves spreadsheets?
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
Not sure what you mean by that.Originally Posted by EagleMark
The last time that I used a spreadsheet to figure anything out was when we first started playing with the BPW and whatnot when I initially joined.
Last edited by damanx; 10-23-2013 at 03:55 AM.
Look at the table, RPM and MAP are reversed in the axis. It does not match up to spreadsheet.
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
Ok, I think I remember now, but correct me if I am wrong, but this table refers to editing the ve table correct?
As stated, last time I touched anything spreadsheet related was about 6 months ago when we were logging for blm values and I think it was then when the rpm/map stuff being reversed.
My data tracing is doing the same thing, using the same xdf. How do you change the Map to Kpa? I went to acquisition/edit Definition/ Values/ Map- and changed the stock units and display units but it still stays in the 20.
trying to get data tracing to work in all columns. i know that i need to get a better log so more of the blocks will fill and be more useful but can't get it to work. attached are the files i'm using. can you please tell me what I've done wrong?
Thank you
miggy
The xdf file you uploaded is corrupt. It keeps causing my TunerPro to crash.
Can you upload it again?
let me know if it doesn't work.
miggy
I can't get your xdf to work.It keeps causing a crash.
Easiest way to do this is for you to try this file.
Let me know if there are other parameters in it that don't work.
so i scrapped everything and redownloaded xdf and adx. and it works good now. thank you for taking the time to help me out.
miggy
Posting Permissions
Reply With Quote
Bookmarks