Difficulty reading stock chip?

[th3fr4nchi5e]

Hey guys, been trying to figure out what Im doing wrong or if Im missing something but couldn't figure out my problem from what I've read. So I bought a Burn2 to burn and read chips for my 1995 Buick Riviera. Tunerpro recognizes the device, lets me initialize and read. The problem Im having is, I open the saved read, through the "Open Bin..." function and none of my values change from the original values which are way off. Im not sure if TunerPro is just reading it wrong or if Im missing something but any help would be greatly appreciated!

Dave

[th3fr4nchi5e]

Well, sorry for posting so early, but I closed and opened Tunerpro back up and this time when I opened the Bin it changed all the numbers to the correct values. Sorry guys! But if anyone else has a similar problem, try closing the current Bin before you open the new one, I think thats what did it for me!

Dave

[EagleMark]

Sort of... when you read a bin and save it. It is not open in TunerPro. You have to Open the bin file after reading and saving it with the Burn 2.