Page 1 of 2 12 LastLast
Results 1 to 15 of 21

Thread: Help convert .bin to .cal

  1. #1
    Fuel Injected! roughneck427's Avatar
    Join Date
    May 2012
    Location
    Fresno CA
    Age
    48
    Posts
    271

    Help convert .bin to .cal

    please convert this .bin to a .cal splease dont have my laptop
    Attached Files Attached Files

  2. #2
    RIP EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    63
    Posts
    10,477
    I don't know how? How?

    I usually just flash the bin into PCM and then read it out as .cal

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

  3. #3
    Fuel Injected! roughneck427's Avatar
    Join Date
    May 2012
    Location
    Fresno CA
    Age
    48
    Posts
    271
    well it was read out as a .bin just have to open it up in TC the it will let you save it as a .cal i ended up getting it remote accessed my laptop with my iphone through teamviewer. Thanks for the quick response

  4. #4
    Quote Originally Posted by EagleMark View Post
    I don't know how? How?

    I usually just flash the bin into PCM and then read it out as .cal
    How do you do that? Winflash doesn't allow bins to be flashed, only cal

  5. #5
    Fuel Injected!
    Join Date
    Feb 2013
    Location
    Oklahoma
    Age
    44
    Posts
    445
    Here ya go.
    Attached Files Attached Files

  6. #6
    RIP EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    63
    Posts
    10,477
    Quote Originally Posted by Montecarlodrag View Post
    How do you do that? Winflash doesn't allow bins to be flashed, only cal
    Sorry, your right. Bin has to be opened in TC and saved as a .cal before flash... I could have done that for him earlier.

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

  7. #7
    Fuel Injected!
    Join Date
    Feb 2013
    Location
    Oklahoma
    Age
    44
    Posts
    445
    Mark,this stuff mixes me up every time I try and remember what's what as well.

  8. #8
    RIP EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    63
    Posts
    10,477
    Yeah, I hate when that happens!

    Usually keeping up around here keeps things in correct memory banks for next time...

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

  9. #9
    Banned
    Join Date
    Aug 2013
    Age
    55
    Posts
    219
    You can convert a bin to a cal and a cal to a bin, a bin to a jcl and a jcl to a cal, a bin to a ddc and a ddc to a cal. you can convert a hpt to a bin and a bin to an hpt also. You can also convert a bin to a tun or what ever it is now.
    But some of you think I talk crap and can't back it up. Maybe I have special powers

    TC.jpg

    look at the time stamp. I had a hard time locating the programs.

  10. #10
    Banned
    Join Date
    Aug 2013
    Age
    55
    Posts
    219
    The JCL to a cal file size is 0, but I can open it in TC just fine. Not sure what is up with that

  11. #11
    RIP EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    63
    Posts
    10,477
    Quote Originally Posted by Caleditor View Post
    You can convert a bin to a cal and a cal to a bin, a bin to a jcl and a jcl to a cal, a bin to a ddc and a ddc to a cal. you can convert a hpt to a bin and a bin to an hpt also. You can also convert a bin to a tun or what ever it is now.
    But some of you think I talk crap and can't back it up. Maybe I have special powers

    TC.jpg

    look at the time stamp. I had a hard time locating the programs.
    You going to show and share how? Or is this just another Gloat about how wonderful you are? Or a lead in to another something you want to sell?

    Start helping and being part of the community or go some where else to gloat!

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

  12. #12
    Fuel Injected!
    Join Date
    Feb 2013
    Location
    Oklahoma
    Age
    44
    Posts
    445
    I can't convert them all,you mean you can lol.
    I can convert well enough for my purposes thanks to help from friends,but that's about it.

  13. #13
    Fuel Injected!
    Join Date
    Feb 2013
    Location
    Euless, TX
    Posts
    2,308
    Quote Originally Posted by Playtoy_18 View Post
    I can't convert them all,you mean you can lol.
    I can convert well enough for my purposes thanks to help from friends,but that's about it.
    I just want to be able to convert a .bin to .hpt and vice versa.

  14. #14
    Banned
    Join Date
    Aug 2013
    Age
    55
    Posts
    219
    Quote Originally Posted by EagleMark View Post
    You going to show and share how? Or is this just another Gloat about how wonderful you are? Or a lead in to another something you want to sell?

    Start helping and being part of the community or go some where else to gloat!
    John has an app to convert a cal to a bin. You will need to contact him for that app --> BTW I know a lot of tuners with this app
    John has an app to convert all of his other Private Label file types to a cal. You will need to get that app from John. I really don't think you will get a app for the jcl to cal because you can tune with DST Demo version for free. The program I downloaded from the internet is a hack app and not from John. The app was pulled from the forum right after it was posted.

    HPT to a bin. I have never done this, but I know how. You open the file in HPT. You go in to the PC's memory and extract it from the PC. I was told that HPT made a change and it is no longer possible, but I told a hacker about this and he extracted the bin from the current version of HPT. That is what he told me and I have not done it yet.

    When HPT has the file open the file will be decrypted and entire. I have been told that you need to locate the file, extract it, then chop off the ends

    I have also been told by another forum member that you can turn the HPT cable into a cable that reads bins. This member said he set up a Virtual Com Port and was able to read out the PCM. I think he used LS1 Flash as the read program.

    You can find all of this information on the internet less what was loss on Monodax HINT HINT

  15. #15
    Banned
    Join Date
    Aug 2013
    Age
    55
    Posts
    219
    Quote Originally Posted by Playtoy_18 View Post
    I can't convert them all,you mean you can lol.
    I can convert well enough for my purposes thanks to help from friends,but that's about it.
    That is the way I feel about it. I only use the one app. It took me forever to find the others. I don't feel right about using them since I was able to acquire a TC program. I have no problems paying $80 per VDF set when I need them. I don't even have DST on in my programs list.

Similar Threads

  1. Want to convert a 1980 Corolla 1.8 from carb to TBI
    By Dejesusjg in forum GM EFI Systems
    Replies: 21
    Last Post: 06-22-2014, 03:21 PM
  2. 1978 327 with auto trans convert to EFI
    By Rob83 in forum GM EFI Systems
    Replies: 5
    Last Post: 07-09-2013, 04:31 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •