Bringing TBI and Multi Port Fuel Injection to a New Level.     EFI Conversions and Tuning! Seattle to Portland! E-mail Tuning Consultant!
Results 1 to 3 of 3

Thread: Possible 500 Cadillac Project?

  1. #1
    Fuel Injected! Lextech's Avatar
    Join Date
    Oct 2012
    Location
    Oak Forest, Illinois
    Age
    53
    Posts
    148

    Possible 500 Cadillac Project?

    I have a friend who is wanting to put a 500 Cadillac engine and T400 trans into a 51 Ford truck. He already has the engine and trans. The engine is actually .040 over so it is a 509. He has the Edelbrock intake manifold designed for a QuadraJet. He thinks he would like it injected. The problem is that he knows nothing about EFI or computers and would like me to do it. The other problem is that he is EXTREMELY CHEAP. I have never messed with TBI tuning but, I actually would like to try. If he decides he wants to pursue this and if I decide I want to get involved-----What would be the best combination of donor parts to start gathering up (ECM, Harness, Distributor, Spark/Knock Module, Throttle Body) I have the GQ4X programmer but haven't used it yet. I assume I would need to make or buy an ALDL cable for Logging/Scanning. What parts from Moates would I need/want to get. This project may not happen but, I would like to start thinking about it and what it would take to pull it off.

    Jeff
    98 GMC RCSB, 5.0, 4L80e, Moser M60, 4.10 gear, Homemade twin turbo w/Junkyard T3 turbos, 24x CNP, 12200411 PCM.

  2. #2
    Super Moderator
    Join Date
    Mar 2011
    Location
    Camden, MI
    Age
    28
    Posts
    3,026
    caddy 500 = 4.3" bore.

    closest i can match that to would be the 454s with their 4.25" bore, so that should give you some idea of the ESC module/knock filter needed.
    1995 Chevrolet Monte Carlo LS 3100 + 4T60E


  3. #3
    Fuel Injected! TINBENDER59's Avatar
    Join Date
    Oct 2013
    Age
    58
    Posts
    24
    i don't know about the tuning stuff but a 454 TBI unit will run it, and your 411 ECU can do the trick if you can shut it down to 2 injectors??? otherwise the 7730 ecu used on TPI wil work nicely, has two injector lines and minimal inputs needed to run it. on the TBI to carb adaptor, I have had one built by matching the secondary bores on the Qjet to the TBI bores, and milling it., important is to use a 1.5 inch block and countersink the plate to manifold bolt holes. Jeff, call me if you need a better description

    Lloyd

Similar Threads

  1. Looking for advice on VW Obd1 project
    By junkyarddawg in forum Other EFI systems and related topics
    Replies: 8
    Last Post: 09-20-2013, 08:36 AM
  2. 16197429 Documentation Project
    By RobertISaar in forum GM EFI Systems
    Replies: 28
    Last Post: 09-04-2013, 06:27 PM
  3. Checking in and describing my project
    By DarrellC in forum Introductions
    Replies: 1
    Last Post: 05-05-2013, 10:40 AM
  4. My Dual TBI Camaro Project
    By gregs78cam in forum GM EFI Systems
    Replies: 82
    Last Post: 04-13-2013, 11:15 AM
  5. Cadillac 500 to TBI
    By Avalanche in forum GM EFI Systems
    Replies: 33
    Last Post: 03-07-2012, 05:16 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •