I have a friend who is wanting to put a 500 Cadillac engine and T400 trans into a 51 Ford truck. He already has the engine and trans. The engine is actually .040 over so it is a 509. He has the Edelbrock intake manifold designed for a QuadraJet. He thinks he would like it injected. The problem is that he knows nothing about EFI or computers and would like me to do it. The other problem is that he is EXTREMELY CHEAP. I have never messed with TBI tuning but, I actually would like to try. If he decides he wants to pursue this and if I decide I want to get involved-----What would be the best combination of donor parts to start gathering up (ECM, Harness, Distributor, Spark/Knock Module, Throttle Body) I have the GQ4X programmer but haven't used it yet. I assume I would need to make or buy an ALDL cable for Logging/Scanning. What parts from Moates would I need/want to get. This project may not happen but, I would like to start thinking about it and what it would take to pull it off.

Jeff