Page 2 of 5 FirstFirst 12345 LastLast
Results 16 to 30 of 74

Thread: Group Buy for LS1 Flash Tool AVT 852 cable!

  1. #16
    Super Moderator Six_Shooter's Avatar
    Join Date
    Feb 2011
    Posts
    2,968
    Just to be 100% sure this will be compatible with the new LS1 flash tool that the boys across the big ond are working on correct?

    This will also allow tuning of an '0411 PCM?
    The man who says something is impossible, is usually interrupted by the man doing it.

  2. #17
    RIP EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    63
    Posts
    10,477
    Quote Originally Posted by Six_Shooter View Post
    Just to be 100% sure this will be compatible with the new LS1 flash tool that the boys across the big ond are working on correct?

    This will also allow tuning of an '0411 PCM?
    Yes of course! I've already been using it as well here on the bench flash with this cable.

    No tuning, just flashing. Download the LS1 FlashTool and try it!

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

  3. #18
    Fuel Injected! JeepsAndGuns's Avatar
    Join Date
    Sep 2011
    Location
    alabama
    Age
    41
    Posts
    1,702
    I would really like to be #5, as I am wanting to convert my 401 to run on a 411 and am really excited about this.
    The only thing stopping me right now, is that the software is not actually out yet. Once its out, tested, bugs worked out, and 100% operational, then I will start my parts collecting, researching, asking questions and then buy the cable/software.
    79 Jeep Cherokee, AMC 401, T-18 manual trans, hydroboost, 16197427 MPFI system---the toy

    93 Jeep YJ Wrangler, 4.0L, 5 speed, 8.8 rear, homebrew hub conversion and big brakes, hydroboost, 2.5in OME lift, 31x10.50's---the daily driver

    99 Jeep WJ Grand Cherokee limited, 4.0L, auto, 2wd, leather and power everything, 99% stock---the long distance highway ride.

  4. #19
    RIP EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    63
    Posts
    10,477
    Quote Originally Posted by JeepsAndGuns View Post
    I would really like to be #5, as I am wanting to convert my 401 to run on a 411 and am really excited about this.
    The only thing stopping me right now, is that the software is not actually out yet. Once its out, tested, bugs worked out, and 100% operational, then I will start my parts collecting, researching, asking questions and then buy the cable/software.
    Heck we are still working on OBDI files?

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

  5. #20
    Fuel Injected!
    Join Date
    Jul 2013
    Location
    Australia
    Posts
    54
    just a note that jaymes avt adx has just been updated because he has figured out dynamic pids. big logging speed increase.

    http://pcmhacking.net/forums/viewtop...tart=10#p36519

  6. #21
    Fuel Injected! JeepsAndGuns's Avatar
    Join Date
    Sep 2011
    Location
    alabama
    Age
    41
    Posts
    1,702
    Quote Originally Posted by EagleMark View Post
    Heck we are still working on OBDI files?
    Yea, I see your point. Guess I should say, once its out and working. Once its released and working, will be the start. I will then start collecting parts (harness, pcm, sensors, coils, etc..) while trying to find the best parts vs prices (probably a blend of JY and ebay) Then I will need to buy, mod, and mount the trigger wheel and crank sensor, then last will be the cable and tuning software. So if the program was released tomorrow, it could very well be next year before I get to the point of actually doing the swap.
    79 Jeep Cherokee, AMC 401, T-18 manual trans, hydroboost, 16197427 MPFI system---the toy

    93 Jeep YJ Wrangler, 4.0L, 5 speed, 8.8 rear, homebrew hub conversion and big brakes, hydroboost, 2.5in OME lift, 31x10.50's---the daily driver

    99 Jeep WJ Grand Cherokee limited, 4.0L, auto, 2wd, leather and power everything, 99% stock---the long distance highway ride.

  7. #22
    Fuel Injected!
    Join Date
    Oct 2012
    Age
    49
    Posts
    132
    I wouldn't mind a backup - unsure if my RR ownership allows a second cable purchase via Moates/TC. Not sure the funds allow it right now due to christmas coming up and all, but I forwarded this link to two bright young dyno operators who would find use in it.
    Last edited by mekkis; 12-03-2013 at 01:24 AM.

  8. #23
    Fuel Injected! roughneck427's Avatar
    Join Date
    May 2012
    Location
    Fresno CA
    Age
    48
    Posts
    271
    Quote Originally Posted by mekkis View Post
    I wouldn't mind a backup - unsure if my RR ownership allows a second cable purchase via Moates/TC. Not sure the funds allow it right now due to christmas coming up and all, but I forwarded this link to two bright young dyno operators who would find use in it.

    you can buy the TC dealer kit which comes with a cable for $300

  9. #24
    RIP EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    63
    Posts
    10,477
    I bought a second one with my RR TC OBDII.

    But still going to get one of these because they come with the AD inputs for Wide Band data.

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

  10. #25
    Fuel Injected!
    Join Date
    Oct 2012
    Age
    49
    Posts
    132
    Quote Originally Posted by roughneck427 View Post
    you can buy the TC dealer kit which comes with a cable for $300
    Good to know, thank you.

    I'm not super concerned with the ADs, I have HP/EFI, and a wideband on my dyno. It *is* the smart move for someone just wanting to get into 411s now, with potential to grow, however.

  11. #26
    Carb and Points!
    Join Date
    Oct 2013
    Age
    51
    Posts
    2
    Quote Originally Posted by EagleMark View Post
    I bought a second one with my RR TC OBDII.

    But still going to get one of these because they come with the AD inputs for Wide Band data.
    if you have an extra tunercat cable i will gladly buy it off ya.. =)

  12. #27
    RIP EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    63
    Posts
    10,477
    Quote Originally Posted by dually681 View Post
    if you have an extra tunercat cable i will gladly buy it off ya.. =)
    You can add your name to the group buy and Poof! You'll have one!

    Plus be eligible to buy LS1 flash when finished!

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

  13. #28
    Fuel Injected!
    Join Date
    Jan 2013
    Posts
    244
    Quote Originally Posted by EagleMark View Post
    You can add your name to the group buy and Poof! You'll have one!

    Plus be eligible to buy LS1 flash when finished!
    For some reason Im betting that he doesnt want JUST the TC2 cable.

    peace
    Hog

  14. #29
    Fuel Injected!
    Join Date
    Dec 2013
    Age
    35
    Posts
    41
    I am in but I dont have the cash till Jan 15. Ugh...

  15. #30
    RIP EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    63
    Posts
    10,477
    Then it could be an order of 6! So eveyone start putting your money together. Tomorrow I will PM each a PayPal address.

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

Similar Threads

  1. LS1 Flash Tool Released
    By antus in forum OBDII Tuning
    Replies: 118
    Last Post: 4 Weeks Ago, 07:02 PM
  2. Open source GM OBD2 flash tool using a ELM327 device
    By EagleMark in forum OBDII Tuning
    Replies: 1
    Last Post: 06-22-2013, 02:00 AM
  3. Memcal Flash Tool
    By EagleMark in forum GM EFI Systems
    Replies: 6
    Last Post: 01-22-2013, 05:26 AM
  4. Exporting Difference Tool listing
    By belaw in forum TunerPro Tuning Talk
    Replies: 1
    Last Post: 08-04-2012, 04:44 PM
  5. TunerPro Rt used as a scan tool?
    By mudbuggy in forum TunerPro Tuning Talk
    Replies: 21
    Last Post: 01-10-2012, 03:38 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •