Group Buy for LS1 Flash Tool AVT 852 cable!

**Fast355** · 10-13-2013

Originally Posted by roby

Come on #5........

I want to be #5 something terrible but changing jobs and being careful on my expenses.

**Six_Shooter** · 10-13-2013

Just to be 100% sure this will be compatible with the new LS1 flash tool that the boys across the big ond are working on correct?

This will also allow tuning of an '0411 PCM?

**EagleMark** · 10-13-2013

Originally Posted by Six_Shooter

Just to be 100% sure this will be compatible with the new LS1 flash tool that the boys across the big ond are working on correct?

This will also allow tuning of an '0411 PCM?

Yes of course! I've already been using it as well here on the bench flash with this cable.

No tuning, just flashing. Download the LS1 FlashTool and try it!

**JeepsAndGuns** · 10-13-2013

I would really like to be #5, as I am wanting to convert my 401 to run on a 411 and am really excited about this.
The only thing stopping me right now, is that the software is not actually out yet. Once its out, tested, bugs worked out, and 100% operational, then I will start my parts collecting, researching, asking questions and then buy the cable/software.

**EagleMark** · 10-13-2013

Originally Posted by JeepsAndGuns

I would really like to be #5, as I am wanting to convert my 401 to run on a 411 and am really excited about this.
The only thing stopping me right now, is that the software is not actually out yet. Once its out, tested, bugs worked out, and 100% operational, then I will start my parts collecting, researching, asking questions and then buy the cable/software.

Heck we are still working on OBDI files?

**antus** · 10-17-2013

just a note that jaymes avt adx has just been updated because he has figured out dynamic pids. big logging speed increase.

http://pcmhacking.net/forums/viewtop...tart=10#p36519

**JeepsAndGuns** · 10-18-2013

Originally Posted by EagleMark

Heck we are still working on OBDI files?

Yea, I see your point. Guess I should say, once its out and working. Once its released and working, will be the start. I will then start collecting parts (harness, pcm, sensors, coils, etc..) while trying to find the best parts vs prices (probably a blend of JY and ebay) Then I will need to buy, mod, and mount the trigger wheel and crank sensor, then last will be the cable and tuning software. So if the program was released tomorrow, it could very well be next year before I get to the point of actually doing the swap.

**mekkis** · 12-03-2013

I wouldn't mind a backup - unsure if my RR ownership allows a second cable purchase via Moates/TC. Not sure the funds allow it right now due to christmas coming up and all, but I forwarded this link to two bright young dyno operators who would find use in it.