Bringing TBI and Multi Port Fuel Injection to a New Level.     EFI Conversions and Tuning! Seattle to Portland! E-mail Tuning Consultant!
Results 1 to 7 of 7

Thread: TunerPro XDF for 0411 LS1 PCM Project!

  1. #1
    EFI GearHead ! EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    57
    Posts
    10,477

    TunerPro XDF for 0411 LS1 PCM Project!

    These are really incedibe XDF files for TunerPro by dimented24x7!

    There are some ADX files around as well. Most from by Jayme from delcohacking.net

    The only issue yet and a flash cable... but not if you have a RoadRunner from Moates.

    EDIT: And there are flash programs soon to be released.
    Attached Files Attached Files

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

  2. #2
    EFI GearHead ! EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    57
    Posts
    10,477
    Here's a bin file for TunerPro RT to use with the XDF files.

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

  3. #3
    Fuel Injected! JeepsAndGuns's Avatar
    Join Date
    Sep 2011
    Location
    alabama
    Age
    35
    Posts
    1,668
    Now all we need is the ability for tunerpro to flash these pcm's and the 411 will instantly become affordable for the comon man.
    I still cant believe a roughly 11 year old pcm is still stupid expensive to tune.
    79 Jeep Cherokee, AMC 401, T-18 manual trans, hydroboost, 16197427 MPFI system---the toy

    93 Jeep YJ Wrangler, 4.0L, 5 speed, 8.8 rear, homebrew hub conversion and big brakes, hydroboost, 2.5in OME lift, 31x10.50's---the daily driver

    99 Jeep WJ Grand Cherokee limited, 4.0L, auto, 2wd, leather and power everything, 99% stock---the long distance highway ride.

  4. #4
    EFI GearHead ! EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    57
    Posts
    10,477
    My RoadRunner works fine! Little expensive but it is all you need and is live emulator.
    http://www.moates.net/roadrunner-ls1...ation-pcm.html

    And there are flash programs soon to be released.

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

  5. #5
    Super Moderator
    Join Date
    Mar 2011
    Location
    Camden, MI
    Age
    28
    Posts
    3,026
    Quote Originally Posted by JeepsAndGuns View Post
    Now all we need is the ability for tunerpro to flash these pcm's and the 411 will instantly become affordable for the comon man.
    I still cant believe a roughly 11 year old pcm is still stupid expensive to tune.
    tunerpro won't do it natively.... at least i doubt it. but some of the delcohacking guys have been working on a cheap flashing/datalogging interface for a while now. i expect it to be a reality probably within a year at the rate they're going.
    1995 Chevrolet Monte Carlo LS 3100 + 4T60E


  6. #6
    EFI GearHead ! EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    57
    Posts
    10,477
    Quote Originally Posted by JeepsAndGuns View Post
    Now all we need is the ability for tunerpro to flash these pcm's and the 411 will instantly become affordable for the comon man.
    I still cant believe a roughly 11 year old pcm is still stupid expensive to tune.
    TunerPro can flash the RoadRunner, and it's also an Emulator for $599. I can't see anything getting cheaper then that? To Emulate an LS engine? . Plug it in and 600 paremeters to start with. Roadrunner has been running Camaros at the drag strip for years.

    Or add $525. for RoadRunner/TunerCat OBDII, then you would have a cable to flash. Simple software, need spreadsheets and a scanner, Still no data but TunerPro could do it or ScanXL is pretty sweet.

    Or add $899. for EFI Live for complete system and still need $250 for a RoadRunner license. With this you get AutoTune, MAF Auto Tune and anything else you can dream up . Very indepth and complex.

    Even when OBDII cables are ready and cheap the software is hard! Then differant software for each PCM. It's a daunting task. And if you get it wrong your PCM becomes a brick? Not as simple as buying a burner for the chip. It's about $300 to start chips without emulation, so $599. and $39 for TunerPro to run, tune and emulate an LS engine is pretty good. Can always have a permanant PCM flashed when done and do another.

    Face it! We are surrounded by LS engines and 0411 PCM and will be for a long time!

    We need to come up with some donations for dimented24x7 and he will keep improving and maybe release an ADX although I swear there is already one? This guys expertise has been a big help for what we do with OBDI stuff too, he's been around a long time! Could also be the source of affordable cable and reflash software!

    So donate!

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

  7. #7
    Fuel Injected!
    Join Date
    May 2013
    Posts
    166
    I just opened up the XDF in tunerpro and wow... holy crap! that had to be a ridiculous amount of work! I hope he enjoys the beer money!

Similar Threads

  1. TunerPro XDF for 0411 LS1 PCM Project!
    By EagleMark in forum OBDII Tuning
    Replies: 23
    Last Post: 06-23-2016, 04:34 PM
  2. 16197429 Documentation Project
    By RobertISaar in forum GM EFI Systems
    Replies: 28
    Last Post: 09-04-2013, 06:27 PM
  3. Checking in and describing my project
    By DarrellC in forum Introductions
    Replies: 1
    Last Post: 05-05-2013, 10:40 AM
  4. My Dual TBI Camaro Project
    By gregs78cam in forum GM EFI Systems
    Replies: 82
    Last Post: 04-13-2013, 11:15 AM
  5. TunerPro XDF and ADX lookup Project
    By EagleMark in forum TunerPro Tuning Talk
    Replies: 15
    Last Post: 01-12-2012, 09:48 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •