Wrote to comp cams for a recommendation and this was their reply:

A cam that best fit your mods is our xtreme energy cam (12-262-4)specs are below. The cam will have to be on a small base circle to clear the stroked out engine.


The cam will help increase power and torque, excellent throttle response, also will have a nice lumpy idle
The cam will be 218/224 @ .050 and the lift is .464/.470 on a 110 LSA


If not done so I always do recommend in upgrading valve-train to protect your investment. The upgrade helps in getting the most power from the engine/cam and keeps its safe. We do offer a cam kit which includes(cam,lifters,springs,retainers,locks,seals ,timing set)



What do you guys think of that?