$42 7747 Manual Trans bin with working shift light?

**EagleMark** · 10-15-2013

Originally Posted by brian617

Hope I did this right...

Almost? $42 bins are 4kb, the one you loaded was 64kb?

Looks like you read it but did not have the offsets set correctly. Read this and give it another shot!
http://www.gearhead-efi.com/Fuel-Inj...Flash-and-Burn

**brian617** · 10-15-2013

Try this.

**EagleMark** · 10-15-2013

Now your getting the hang of it!

**brian617** · 10-15-2013

I have another 5.7 manual bin that ill get the BCC and up load it if you dont already have it.

**brian617** · 10-16-2013

I have an ANLW and also a Hypertech out of a 16196396 that I could post if interested.

**EagleMark** · 10-16-2013

Post away! More bins more better!

**brian617** · 10-16-2013

couple more

**buddrow** · 11-30-2013

Eaglemark, did you ever figure out the shift light? I tried looking it up in the latest xdf with the amuu bin brian617 provided to no avail. Am i missing something? Id like to add a shift to my my auto lol

**EagleMark** · 11-30-2013

I've added all the parameters from the dissasembly, some I had and knew were overlapping with auto trans TCC... but never had time to verify anything was correct. Next time I get a manual trans 7747 I will.