Hello just a quick question. Engine temp and coolant temp are displayed both in Fahrenheit right? Only reason I ask is engine temp is 200ish and coolant is 90ish , the sensor is new twice over lol . It would suggest a stuck open thermostat?
Hello just a quick question. Engine temp and coolant temp are displayed both in Fahrenheit right? Only reason I ask is engine temp is 200ish and coolant is 90ish , the sensor is new twice over lol . It would suggest a stuck open thermostat?
I'm not sure what you are using to test with but 200F is 93C.
So if you are using an ADX file coolant may well be read in Celsius for that sensor in this instance.
Note: that a lot of ADX files are set to read both F & C via a lookup table, you may have associated with the wrong parameter.
From what you have said there is a good chance you have one reading in F and the other in C
MOC
Ford 28 Roadster Pick Up
Ford Flathead 51 8BA. Balanced, ported,3/4 cam, Edelbrock 59A heads, C4 trans, 8" diff 3.55 narrowed 40mm /side.
Fuel injection by Flatattack racing, 60mm Holden TB.
ECM Delco 1227808 160 baud.
Posting Permissions
Reply With Quote
Bookmarks