ALDLdroid

[eutu1960]

hello guys,

Totaly newbie here want to give a try on ALDLDROID,
I have 2001 opel blazer, C22NE GM family engine, 2.2L, manual, SOHC, , only available in my country.

1. It have 16 pin ALDL connector, but it's not obd2 for sure.
2. People talk about adx files, I can't find one that matched to my car.
ECU service number is 16203172.

What I want is use ALDLdroid as diagnose tool/scanner, I'm a bit worry about the adx files.
Or can I have adx from EPROM "bin" file? What should I do?

Best,

Simon

258675878_1_644x461_ecu-blazer-montera-sohc-bandung-kota.jpg
Section 8A-202-0 E. Diagnosis Muka Konektor Harness 0.pdf - Adobe Reader.jpg

In the US all cars after 1996 came with obd 2, this nay help http://www.obdii.com/connector.html

[simon blazer]

this car is unique and only exist in my country (Indonesia), it have chevy s10 model, but with different engine (similar to opel calibra), and was sold with opel brand.

It's work with GM tech1 scanner, some says that it have obd 1.5, but definitely not obd2.
is there any scanner software that don't require adx files? where those "adx" files come from ?
The only file I can get is the "bin" file from ECU.

Best,
Simon

[Superbee]

any known issue of when I shut my car off with my in dash tablet connected, the aldl droid FREAKS out.. popping up error message then going away then popping up again rapidly for about 10 seconds before the program crashes completly?

[Jim_Rockford]

Maybe Im an idiot but I cant get this shit to work, Ive paid 90 bucks for the bluetooth adapter and bought the droid app and I cant seem to find how to add other xdf files nothing on my droid app allows additional files

[1320_john]

@Jim_Rockford: Are you scanning or tuning? If you are tuning, you need the xdf file. If you are scanning/datalogging, you will want an adx file. Because you state Bluetooth adapter, I'm assuming you want to scan. Tuning usually request an Ostrich connected via USB.

Based on your vehicle in your signature, you probably want the A217 adx file off the tunerpro.net website. (I'm sure the same file is on gearhead-efi too)

Place the adx file in your /ALDLDroid/adx/ folder of your phone. Then go into ALDLDroid settings, select 'Datastream file'. The A217 adx file should show up there. I would also select 'Reset dashboard' in ALDLDroid settings.

[Jim_Rockford]

sorry, that vehicle is sold, Current one is a 1992 Chevy B4C camaro with a LB9 305/5 speed , and yes for right now Im trying to dip my toe in the water so scanning is main thing Im concerned with, DSPO installed 33lb injectors and blocked off the EGR and near as I can tell Its still got the stock tune. code on the prom match the codes on the ECM.

[1320_john]

@Jim_Rockford: adx file for your B4C should be in your gmail account; A100; I also PM'ed you a link for it.

[Jim_Rockford]

Got the files installed and it works great , So easy a Caveman like me can do it.