ALDLdroid

[Mohammadnour]

hello please help me i bought the app aldldroid but i couldnt find my adx file for my car it is daewoo lanos 1.5 8v and non of adx on the app work
thank you all

[3400tZ]

Mohammadnour, sorry I missed this message but I hope you were able to find the ADX file you were looking for. I personally don't have this file on hand.

Guys, I wanted to show you the app's Website I've been working on and also would like you all to like the Facebook page :D

Facebook page is here: https://www.facebook.com/aldldroid

And Website is here: https://www.aldldroid.com/

The Website shouldn't be super useful for you guys that already knows a lot about the app but hopefully, it will help to give the app some visibility. As for the Facebook page, I hope I will be able to post some updates every once in a while. Otherwise, it would still be a good way for the app's users to interact together as well.

I would appreciate if you could share the Facebook page with whoever you think might be interested in the app :)

Thank you!

[ender11]

Hi!
How does ALDLDroid receive 160 bod datastream via bluetooth? I mean, I know, how 160 bod data is received via com-port, where 1 bit is resembled by 1 byte. is the same applicable to bluetooth connection? at what baudrate bluetooth adapter receives 160 bod? 2400? 4800? I tried to just hook up a csr bt module hanging around, looks like some bits just dropped when such thing as a framing error occurs (when stop bit is missed, I think) and ALDLDroid shows no link. everything works with usb cable, but I want bt :)

[3400tZ]

For the app, it makes no difference wether it's coming from bluetooth or USB. The bluetooth adapter cannot just be a regular bluetooth to serial adapter, it has to be one such as the one 1320 electronic is selling. These adapters do the translation of baud rate from say 160bps to I'm assuming 9600bps. Final baud rate doesn't really matter for the app and the app or bluetooth adapter cannot get the data faster than the ECU can transmit it anyway so converting the baud rate to anything that is standard and above 160bps is most likely good enough. Anyway, I'm just the software guy and John @ 1320 electronics can probably answer more specific questions.

[ender11]

thanks for answer! I wonder if bluetooth data class have something about data rate, just pipe. then, what baudrate aldldroid sets for usb2serial adapter to receive 160 baud data? and how it differs '0' from '1'? "0xC0 is for 1, 0xF8 is for 0"? how much bits are taken into account?
I've found no information about 1320 adapter, how it works.

[3400tZ]

The app will use whatever baud rate the ADX file is specifying. Just buy his adapter and don't worry about how it works :)

[ender11]

you mean, constant messages like " Response couldn't be divided by 9 without remainder, will prepend this data to next response: 0000" are OK?