ALDLdroid

[3400tZ]

Looks like the app is receiving no data at all... could it be a bad connection at the ALDL connector or something ? The command that is being sent is fine but the data is getting lost between your ECU and the app somehow. Something is different than when you're using TunerPro it seems, not sure if you can pinpoint what exactly

[kur4o]

I tested some adx on an older version of the app.
The first attached adx opens fine.
second gives some error[Can`t parse the adx]

I did an in depth compare between the 2 adxs but couldn`t figure any out of place issue. The files do look almost identical. Even on hex compare.

[3400tZ]

I tested some adx on an older version of the app.
The first attached adx opens fine.
second gives some error[Can`t parse the adx]

I did an in depth compare between the 2 adxs but couldn`t figure any out of place issue. The files do look almost identical. Even on hex compare.

The MODE 4 BLM RESET bytestring looks weird in that MOD ADX, that's probably your problem, try reverting that part to like the original ADX file

[kur4o]

The MODE 4 BLM RESET bytestring looks weird in that MOD ADX, that's probably your problem, try reverting that part to like the original ADX file

That got some empty string for command out of nowhere. Thanks for spotting it. Now all loads fine.