Results 1 to 2 of 2

Thread: hey guys, new guy here using EBL and tunerpro

  1. #1
    Carb and Points! Dman1987's Avatar
    Join Date
    Aug 2013
    Age
    40
    Posts
    1

    hey guys, new guy here using EBL and tunerpro

    Hey guys, I am on a few forums, usually as Dman1987 or celiracer94.

    I am from west texas and have a '90 454SS truck with a 496 stroker ('049 heads,NX262 cam, 10.1cr) running the TBI setup with an EBL ecu and using tunerpro for tuning(using EBL_V31.XDF).

    I have just started and am just getting the hang of things, I figured some searching on here could help me get some power out of this engine

  2. #2
    RIP EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    63
    Posts
    10,477


    Although we'd be glad to help! We are at a disadvantage because all the EBL files are not supposed to be posted on internet/forums.

    But there is loads of help from Rbob over at Thirdgen for Dynamic EBL


    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

Similar Threads

  1. Hi guys... another newbie ...
    By tunedport in forum Introductions
    Replies: 3
    Last Post: 10-25-2012, 07:12 AM
  2. hey guys
    By droptopstng in forum GM EFI Systems
    Replies: 31
    Last Post: 08-10-2012, 05:27 AM
  3. Any JavaScript guys?
    By EagleMark in forum Gear Heads
    Replies: 5
    Last Post: 07-10-2012, 07:44 PM
  4. got a new one guys
    By droptopstng in forum GM EFI Systems
    Replies: 6
    Last Post: 03-22-2012, 06:32 PM
  5. OK you LT1 guys, I have a question
    By JeepsAndGuns in forum GM EFI Systems
    Replies: 9
    Last Post: 11-24-2011, 03:07 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •