Making a Custom Dash

[BurgerWorld]

I go into Edit .adx then dashboards. I am having trouble making sense of gauge location. I add the gauge and try to input numbers on the four boxes, but I just don't know how to configure the gauge location. Thanks for any help.

[delcowizzid]

you are entering co-ordanates on the screen for every gauge. top left bottom right .top is the height of the top of the gauge, 0 being the top of the dashboard and 100 being the bottom.left is where the lefthand side of each gauge is and goes from left to right the same as above 0-100.and bottom and right are just the same its the edges of each seperate gauge .it dictates the size of the guages and the number that you can fit on the screen and there location on the screen.

[delcowizzid]

so say you want 4 gauges to cover the screen you would have the first gauge TOP=0 LEFT=0 BOTTOM=50 RIGHT=50 this is left top gauge top right gauge would start TOP=0 LEFT=50 (where the last gauge ended right) BOTTOM=50 RIGHT=100.now you have 2 gauges the same size side by side :D .next bottom left TOP=50 LEFT=0 BOTTOM=100 RIGHT=50 and yadda yadda yadda you should have the idea now lol

[BurgerWorld]

I knew that .... just kidding... thanks delco I just couldn't make sense of it.

[EagleMark]

What adx file are you using? I can add a ton of dashboards in a few minutes, but then you have to right click on each gauge and choose what you want there.

[BurgerWorld]

$6E-1227165-v1.2

[EagleMark]

Already posted in your other thread...